Fullerton Metal Fabrication

27/08/2024

22/08/2024

Various brass bronze work over the last year or so

20/08/2024

Steel and glass partition, hot rolled steel, black patina with an oil and wax

Design .ely.architect
Builder
Photos

28/06/2024

Steel door with reeded glass in a beautiful heritage home, the off shape opening and protruding stair made it a bit interesting, I didn't want to fasten into the floor or cut any trim so with a couple of scribes, bar a few holes in the plaster the home is untouched

30/04/2024

Two side table bases for
Hammered base and textured stems.
The round base is constructed from a piece of 9" solid round bar and the square is capped 8" square tube
Blackened and finished with oil & wax

29/01/2024

Classic style entrance railings for a home in Rosedale.
Lots of little pieces of metal fused together to make all these shapes.
Thanks to for the tips they shared with me on this one 🙏

26/01/2024

It was a pleasure to work on this property, an incredible amount of design, planning and ex*****on all-round. Including the laneway house it's a 5 unit condo, it was done this way to avoid the city's problematic zoning restrictions, although there are now allowances in Toronto, this building has been in the works for many years and it's probably the only semi detached condo?

We built aluminum panels around the building including a coupe louvered vents at the back of the building. Apart from that there are no ugly vents, pipes or drains sticking out of the cladding, pretty impressive for the four bathrooms, kitchens and laundries it houses, no notched or half tiles on the facade either, it's a pleasure to inspect and the inside is just as meticulously planned out.

We fabricated a channel system to hide two downspouts on the front of the building and finished off with some clean galvanized railings.

11/08/2023

Steel and glass office door with sweep and weather stripping for sound insulation, satin black powder coat.
Another beauty by 🙌

21/03/2023

Commercial guardrails and handrails for a west end apartment building. We had a good hand in the design of this one along with

09/02/2023

Steel vanity for .ely.architect and
Sheet metal panels and steel tube construction - gloss powder coat finish

30/01/2023

Steel partition - brass plated
We worked with the homeowner to find inspiration and create this divide between rooms

08/02/2022

New steel bases for clients marble tops, hand forged look with a satin black powder coat

08/02/2022

Partially concealed adjustable feet in 1" square material

16/06/2021

Office partition for a beautiful condo project in downtown Toronto freshly renovated by
Near invisible joins between sections necessary to get this in the freight elevator

19/05/2021

Tig welding cart. This is, by a long way, the nicest piece of shop equipment I've made for myself. It's focused around the bottle as that's so much bigger and heavier than the welder itself
I asked to make to a coaster to protect the texture black powder-coat from the gas bottle, inspired by the one he made for himself.
Dave jumped on this and designed it on before 3D printing it out for me, taking into account the design of the cart he went above and beyond, thanks Dave mate you're a legend! 🙌

12/03/2021

Who's a good boy?

Railing project with
No visible welds : Tidy

10/02/2021

Shelving unit - room divide - guard
Three piece unit built from 3/8" aluminum plate with a powder coat finish.
CAD work by Colin from .ca