M J B Engineering Essex Ltd

Name: M J B Engineering Essex Ltd
Address: Brentwood, GB
Telephone: +447568156899
Price range: ££

Home
United Kingdom
Brentwood
M J B Engineering Essex Ltd

A decade of experience in a multitude of industries, we are your partner for all engineering works. We are certified to BS EN 9606-1 for welding steel alloys.

MJB Engineering (Essex) Ltd specialise in the welding and fabrication of a variety of metals, for many industries. We operate a well-equipped fabrication shop in Brentwood, Essex but also carry out on-site welding, maintenance and repair in London and the South East. We have a range of procedures on hand to cover most welding project requirements but are always willing to to get further accreditat

ion if required. We also carry out welding on stainless steel, aluminium, magnesium, nickel alloys and titanium. We operate the highest quality welding equipment available to ensure quality, consistent welds. This includes Pulse & TwinPulse GMAW. A few of our qualifications are below;
BS EN 9606-1 Coded
IRATA Industrial Rope Access Technician
IPAF 3a & 3b Mobile Elevated Work Platform Certificate
CSCS Card Held
CCNSG Certificate
Forklift Certificate
SafeContractor Accredited

We specialise in the aggregate, recycling and waste sectors which has stemmed from our years of experience in the field. We can carry out all aspects of repair and maintenance to conveyors, crushers, hammer mills and associated machinery. This includes the installation of wear plates and hard facing. We work closely with leading suppliers such as SSAB and Welding Alloys to provide proven, cost effective and time efficient solutions. We are happy to supply hardfacing samples and NDT analysis of hardness & CVN toughness. We aim to deliver high quality solutions and services across a multitude of industries including:

Aggregate Quarrying and Production. Construction Equipment, Heavy Plant and Agriculture. Waste Transfer and Recycling Solutions
Marine Operations, Quays & Docks and Shipping Vessels. Materials Handling Systems, Conveyors and Hoppers. Lifting and Winching Systems. Structural Steelwork, Repair and Installation

12/09/2024

Delivery and installation of bakery equipment for using our manual forklift.

Specialist transport for the engineering and commercial bakery / catering sectors.

03/01/2024

We are well underway with a complete refurbishment of this Hobart Planetary Mixer.

Everything will be renewed and modernised, along with a fresh coat of paint.

Controls have been changed to meet safety requirements along with the addition of a safety mechanism for the bowl height.

A bowl guard is also being manufactured for this machine.

02/01/2024

Signs fabricated for Sangsho Equestrian centre.

02/01/2024

Mixer completely overhauled for a bakery in North London.

02/01/2024

Small dolly made for moving material on site.

08/02/2023

Mobile Welding, On-site welding, burning and gouging.

CNC Plasma Cutting

All steel and aluminium fabrication. Structural steelwork.

Coded welder with a decade of experience in Energy, Aerospace and Construction.

Steel, Cast Iron, Aluminium & Stainless Steel repaired.

MIG (MAG/GMAW) Welding
TIG Welding
MMA (Stick/Arc) Welding
FCAW (Flux Core) Welding
Carbon Air Arc Gouging
Thermal Lancing
Oxy-Acetylene Cutting
Brazing
Hardfacing & Wear Resistant Overlay

Diesel, Petrol, 110v/230v Single Phase & 400v 3 Phase Welding Sets Up To 800A

Competitive Rates

01/02/2023

Metal Spraying of a worn shaft to rebuild bearing seat to correct dimensions. This is Powder Flame Spraying using Oxy-Acetylene.
Perfect for shafts as it is a 'cold' process so there is no distortion.

14/01/2023

Some jobs going through the workshop the last few weeks. We've rebuilt our surface grinder and ground some parts. Lanced a few pins from hydraulic rams. Taken delivery of a 1918 steam locomotive chimney for repair and completed 10 hardfaced bolt protectors.

28/10/2022

And that's the table out of the door.

28/10/2022

Anyone after composite wear plate? Highly abrasion resistant and impact resistant varieties in a range of thicknesses. These are seconds as they've warped so a lot cheaper than normal. Give us a DM and I'll see if there's a sheet suitable for your application.

25/10/2022

This is the step over point.

25/10/2022

Another mill table loaded and ready to weld.

18/10/2022

Fill 'er up. A good 100kg+ into this so far.

15/10/2022

I'll just leave this here...

09/10/2022

1920's Holbrook leadscrew nut reclaimed. The original cast bronze nut was cut in half, and then the threads machined out with a 1" ball nose end mill. New piece of phosphor bronze was turned to 1" and left slightly over length. Silver soldered together with JM EasyFlo No. 2.
Happy customer and preserved the original part.

29/09/2022

Still burning. 30mm to go yet.

23/09/2022

Getting started on a little pair of rolls, on the baby Positioner. From a VRM that crushes minerals.

16/09/2022

Blasted this frame back to better than SA2.5
It needs some work though!
For our friends at

10/09/2022

Custom brass nut underway for customer. 1-1/2"AF

Now for the 1" UNC thread.

04/09/2022

Bale grab repair continued... Had several ideas on how to strengthen this assembly - particularly to take the strain off of the box section which had split before. I think adding the second pin at the top along with the additional rigidity from the stiffeners should stop a lot of the flexion. The original design having only one pin was a leverage point for sure.

02/09/2022

Had a few setbacks but got it fully welded as it was getting dark. Just the boss to TIG weld in tomorrow, cap plate on the end, and some plug welds for those internal stiffeners.

02/09/2022

Work continues on the bale grab. 10mm plate inside should stiffen it up a bit. Now to clean up and start prepping for welding, and rolling the top and bottom plates

01/09/2022

They don't make motors like they used to. The ancient power hammer motor has been in for overhaul with our friends over at Electrical Repair Co. It's had a checkover with the meter and now the windings are being cleaned. 80 years of coke dust take their toll!

We just had to source some imperial bearings, as the originals were obsolete designations. Took the rotor down to our local bearing supplier and they've sorted us out a KSM for the deep groove and another firm is sorting the roller bearing. So now it's time to pull these bearings off using the new (to me) Sykes puller.

01/08/2022

Another overnight/next day cast iron repair for the rewinders.

28/07/2022

Before, during, after.

Failed silver solder joint on one of the heavy duty cladding torches. Chucked it in the lathe, vee'd out the joint, and used some Johnson Matthey cadmium bearing silver solder to glue it all back together.

Address

Brentwood

Telephone

+447568156899

Website

http://www.mjb-engineering.co.uk/

Alerts

Be the first to know and let us send you an email when M J B Engineering Essex Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to M J B Engineering Essex Ltd:

Videos

Metal Spraying of a worn shaft to rebuild bearing seat to correct dimensions. This is Powder Flame Spraying using Oxy-Acetylene. Perfect for shafts as it is a 'cold' process so there is no distortion.

Getting started on a little pair of rolls, on the baby Positioner. From a VRM that crushes minerals.

Buffalo GL191 Mixer Repair

Another 20 litre mixer repaired and heading back to the bakery tomorrow. ☑️ Gearbox Dismantled & Thoroughly Cleaned ☑️ New Bearings ☑️ New Seals ☑️ Fresh Food Grade Grease ☑️ Seized Dowel Pin Removed & Replaced ☑️ Guard & Exterior Of Machine Steam Cleaned For any mechanical engineering requirements, give us a call. Fast turnaround with only quality components. This machine was heading to the scrap bin but has been given a new lease of life.

Plasma Cutting 5mm Bracket

5mm steel engine mount for a 1920s motorcycle.

Shortcuts

Our Story

MJB Engineering (Essex) Ltd specialise in the welding and fabrication of a variety of metals, for many industries.

We operate a well-equipped fabrication shop in Brentwood, Essex but also carry out on-site welding, maintenance and repair in London and the South East.

We are certified to BS EN 9606-1 for welding steel alloys. We have a range of procedures on hand to cover most welding project requirements but are always willing to get further accreditation if required.