Norfolk Mobile Welding Services

Norfolk Mobile Welding Services Mobile welding and fabrication. Specialising in on site positional welding, inc vertical up and multi run overhead. Batch or one off fabrications.

Norfolk Mobile Welding Services is an established business located in North Norfolk providing high quality on or off site welding and fabrication to businesses and private customers. Fully qualified with over 14 years experience I aim to provide customers with a fast friendly service that delivers work to the highest standard at very competitive prices. NMWS offers on or off site welding and fabri

cation support to marine, construction, agricultural and automotive industries as well as private customers. Being fully qualified in City and Guilds and Awarding Body Consortium Level 2, NMWS can utilise either the TIG,MAG/MIG or MMA (Stick) processes to weld and fabricate in Steel, Stainless Steel Stainless ( including Duplex and Super Duplex) and aluminium onsite or in the workshop. Also, offering a complete onsite fabrication service, NMWS can carry out brazing, oxy fuelled gas cutting, arc gouging, plasma cutting and Magnetic drilling.

1900mm diameter well cover with offset lockable access hatch finished today.200mm edge rolled be hand and welded fully....
02/04/2025

1900mm diameter well cover with offset lockable access hatch finished today.
200mm edge rolled be hand and welded fully.

A couple of other little jobs completed in between bigger jobs.4 posts and 4 heavy duty hinges fabricated and galvanised...
27/03/2025

A couple of other little jobs completed in between bigger jobs.
4 posts and 4 heavy duty hinges fabricated and galvanised this week.

Lug change on a grab today.Original lugs cut off and cleaned up, then an extension to the original 12mm plate to allow t...
25/03/2025

Lug change on a grab today.
Original lugs cut off and cleaned up, then an extension to the original 12mm plate to allow the new lugs to fit to the correct centres. Welded the extensions on with a fillet and a V butt weld, the set up and welded on the new lugs.

Rotten cross member and channels cut out and replaced with new 6mm folded channels on a 40 ft flat bed trailer after the...
21/03/2025

Rotten cross member and channels cut out and replaced with new 6mm folded channels on a 40 ft flat bed trailer after the original gave way.

Another bucket completed today.Old floor cut out and replaced, new wear strips and new bolt on edge. Proper job 👌 ...
20/03/2025

Another bucket completed today.
Old floor cut out and replaced, new wear strips and new bolt on edge. Proper job 👌

316 stainless steel flue box for a biomass boiler fabricated today.Flue outlet rolled by hand ✋️ Tig welded with the EWM...
17/03/2025

316 stainless steel flue box for a biomass boiler fabricated today.
Flue outlet rolled by hand ✋️ Tig welded with the EWM Tetrix 230.
#

Little handrail finally fitted in the customers cottage this week. # #
12/03/2025

Little handrail finally fitted in the customers cottage this week.

# #

Cousins subsoiler arm repair finished end of last week.It came in already gas cut out by the customer having been bent.S...
11/03/2025

Cousins subsoiler arm repair finished end of last week.
It came in already gas cut out by the customer having been bent.
So all cleaned up by me,and using the opposite side for dimensions, the box section was replaced with 100x100x10 to replace the original 8mm wall and then fitted with 20x75 and 20x50 reinforcing pressed to match the opposite side.

Cracks repaired this afternoon on a Cousins subsoiler headstock.The horizontal welds were welded vertical up before I tu...
06/03/2025

Cracks repaired this afternoon on a Cousins subsoiler headstock.
The horizontal welds were welded vertical up before I turned the headstock 90 degrees to grind out the cracks in the bottom and weld/flush before plating and welding plate vertical up.

Bucket given a new lease of life with a new new 6mm floor, wear strips and bolt on edge 👌
28/02/2025

Bucket given a new lease of life with a new new 6mm floor, wear strips and bolt on edge 👌

Formwork progressing on site where the first ring pilings were cut down last week. #
28/02/2025

Formwork progressing on site where the first ring pilings were cut down last week.
#

Something different this morning. Out onsite welding cracks in the aluminium structure of a Gloster Meteor thats being r...
25/02/2025

Something different this morning.
Out onsite welding cracks in the aluminium structure of a Gloster Meteor thats being restored.
First commisioned in 1943, these were Britain's first Jet Fighter, and the allies only jet aircraft to see combat in WW2.

Back out onsite to finish cutting today, with the added bonus of 4 inches of water to paddle about in 😂
24/02/2025

Back out onsite to finish cutting today, with the added bonus of 4 inches of water to paddle about in 😂

Onsite today cutting off the tops of ring pilings that needed to be bought down to the correct level.Harsh cutting with ...
20/02/2025

Onsite today cutting off the tops of ring pilings that needed to be bought down to the correct level.
Harsh cutting with the concrete not fully removed behind and Savage on the knees 😂

Little handrail sprayed today after checking the fit at the customers. Hi build zinc phosphate primer and 4k gloss top c...
19/02/2025

Little handrail sprayed today after checking the fit at the customers.
Hi build zinc phosphate primer and 4k gloss top coat

More lug changes today. This time on a bucket 😘
14/02/2025

More lug changes today. This time on a bucket 😘

A couple more of the walkways. All designed by myself to fit the customers requirements and to be easily I started onsit...
14/02/2025

A couple more of the walkways. All designed by myself to fit the customers requirements and to be easily I started onsite.

30 metres of walkways and handrails that I've been fabricating recently fitted today.The customer required the full leng...
12/02/2025

30 metres of walkways and handrails that I've been fabricating recently fitted today.
The customer required the full length of their weighbridge to have fixed walkways with handrails and steps both sides to enable drivers to get out or in their vehicles safely wherever they stop.
Job complete 👌

Address

Sculthorpe
Sculthorpe
NR217PU

Website

Alerts

Be the first to know and let us send you an email when Norfolk Mobile Welding Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Norfolk Mobile Welding Services:

Videos

Stuart getting the last of several thousand continuity welds down today in between the bad weather. #sitewelding #construction #mobilewelding #offshore #engineering #renewables #fabrication #reinforcement #norfolk

Tapping M5 threads today for fixing the window furniture with the Tapmatic 50x at 700 rom, supplied by Tapping and Tooling Supplies t/a Tapmatic UK

Shortcuts

Share