C&P Engineering Services Ltd

18/01/2024

We still can’t get over how amazing the were last Thursday at the incredible Cutty Sark, Royal Museums Greenwich. What an evening to remember! 🥂

We wanted to take the time to thank our fantastic sponsors: EDF , Wright Engineering, National College For Nuclear , C&P Engineering Services Ltd, AFBE UK - Assoc. For Black and Minority Ethnic Engineers, Petrotekno , Cavendish Nuclear, Sellafield Ltd , Nuclear Decommissioning Authority, CATCH, The Welding Institute , BCECA.

12/08/2023

A great day and an amazing amount of money raised for Stroke Hub Wales final total being £6,500 👏🎉

Thanks to C&P Engineering Services Ltd for hosting an absolutely stellar charity golf event in our honour! Community members and organisations came together to raise an impressive £6,500 to support our organisation, Stroke Hub Wales, as a central hub for stroke research, innovation, and education i...

15/06/2023

A huge Congratulations to Penlan Juniors as they land the Treble!

C&P Engineering Ltd sponsored Penlan Juniors in the AFC U12 Swansea district league during the 2022/23 season.

Looking splendid in their C&P Engineering Ltd kit. Penlan Juniors were undefeated in their first competitive season.

They went through the season with a record of P18 D1 L0 resulting in them running out the Swansea District Section A Champions.

There was a playoff against Section B winners Mumbles Rangers, where they triumphed 3-1.

To complete the treble, they went to home ground of Briton Ferry Football Club, where many a good player have graced the pitch, where during a pulsating game, they beat Morriston Town 4-2.

C&P’s Carl Gwyther, whose son Freddie plays for the team remarked “The boys have been together since playing under 5s mini football, by playing football together for so long, has resulted in a great team spirit and this is now the fruits of their labour”.

C&P Engineering Ltd wish Penlan Juniors all the best for 2023/24 campaign. Look out Manchester City!!

International Electrical, Control & Instrumentation engineering contracting company

15/06/2023

C&P Engineering Services Ltd are proud to be Sponsoring Ynystawe Cricket Club for the 2023 season.

To celebrate this event, several of C&P’s employees attended a match between Ynystawe and Neath cricket clubs on Saturday the 10th June. This proved to be a thoroughly enjoyable day, with an extremely exciting finish when Ynystawe managed to bowl Neath CC out for 173 to secure victory by five runs.

C&P Engineering Services Managing Director Paul Bunyan (pictured on the rear-right of the photograph) commented:

‘Thank you Ynystawe Cricket Club for a great day which was enjoyed by everyone and followed by an excellent result.

We were very well looked after and many thanks must go to the Chairman Phil Rowe and the superb food provided by the catering staff.

A fantastic day with an excellent result and we wish Ynystawe Cricket Club all the very best in their future endeavours in this league’.

For further information about C&P Engineering and Training Services please visit www.cpengineering.co.uk or www.cptrainingservices.co.uk

International Electrical, Control & Instrumentation engineering contracting company

24/02/2023

02/02/2023

C&P Engineering are sponsoring Glyncollen Primary school via 2B Enterprising who work closely with primary school children across England and Wales.

Sue Poole the educating founder of 2B Enterprising recognised that to make a significant change to the entrepreneurial skills of our workforce, we need to work with them from a very early age.

The first visit took place in January 2023 at Glyncollen Primary school.

Rhiannon John Education Resources Officer from 2B Enterprising took the session along with Steve Davies from C&P Engineering who spoke to the children about C&P Engineering and the type of electrical work they are involved with.

The session included Rhiannon telling the children an interactive story about Bees and then asking them a number of questions how the Bees might sell their honey to make money and then buy other items with it.

The children were also asked to draw a business card and then present it to each other to learn how to greet each other in a business setting by shaking hands and speaking a little bit about themselves.

The class was superbly well behaved and fully embraced the programme. The children were extremely enthusiastic about the story, books and the hive of goodies that were given to each of them at the end of the session.

It’s proposed that C&P Engineering will attend three more meetings with 2B Enterprising and the primary school during the year.

02/02/2023

We are running the CompEx Ex11 Mechanical Courses on the

3rd April 2023 - there are still a few places available

15th May 2023 - there are several places left

21st August 2023 - there are several places left

The Ex11 Mechanical Course covers three days consisting of mechanical hazardous area awareness training, including the established CompEx Foundation Module (Ex F), with a written examination and finally overall core competency is validated with an installation and inspection practical assessment on mechanical equipment.

Ex11 follows a syllabus to enable safe working practices for the international standard ISO 80079 Parts 36 & 37 and allows employers to benchmark the core competency requirements of both their staff and sub-contractors.

Who Should Attend The Course?

Please Read More ;
www.cptrainingservices.co.uk/course/compex-ex-11-mechanical-course/

Please click the link below to book this course or share with anyone you think might be interested in attending this course.

www.cptrainingservices.co.uk/course/compex-ex-11-mechanical-course/

CompEx Ex11 Mechanical Course - Hazardous Area Mechanical Training and Assessment - CompEx | Call +44(0)1792 897002, or BooK Online Today

17/01/2023

Please join us at Hazardex Live which is taking place on the 1st and 2nd March at the Majestic Hotel in Harrogate.

As one of the main sponsors C&P Engineering Services Ltd would like to invite you as our guest with a Complimentary Free Entry Pass to the exhibition.

Please Sign up for your Free Pass Now!

https://data.imlgroup.uk/hazardex-live

Hazardex Live is the perfect platform for topical discussions on process safety-related topics, sharing and learning about key industry information and sourcing product and service suppliers.

www.hazardex-event.co.uk/event.aspx

C&P's Principal C&I Engineer/Technical Director Tal Hopkins will be presenting a discussion on 'the costs vs benefits of having a committed and consistent approach to ATEX Inspections versus a reactive one that needs to be re-invigorated periodically when legal compliance is challenged'.
Hazardous area Inspections and the law – where do you stand when the regulator calls….
The importance of having a competent installation team and designers, robust Initial Inspections and a consistent documentation throughout this principal process.
External Resource vs Internal Inspection Teams, (managing your internal resource competence vs verifying your third-party capabilities).
The role of the Responsible Person and the hierarchy of control
Navigating the minefield of remedial repairs, dealing with critical faults by tuning out the noise.

Please click on the link below to see details of the full Exhibition and Conference programme including a list of speakers and topics they will be covering during the 2 days.

www.hazardex-event.co.uk/Programme.aspx

14/01/2023

A CompEx centre spotlight.

C&P Training Services Ltd is a certified training provider delivering Electrical and Industrial Training.

We spoke to Dewi Evans, Senior Hazardous Area Inspector and Senior CompEx Trainer, to find out more about how C&P Engineering Services Ltd works with employers to ensure they employ a competent, skilled, and sustainable electrical workforce.

Find out more here: https://bit.ly/3ikENTy

10/01/2023

Join our Team - Industrial Installation Electricians

Industrial Installation Electricians Required

If you know of anyone who might be interested please feel free to share this post.

Location: South Wales (UK)

Industrial Installation Electricians – The role will require time served industrial installation electricians with experience in carrying out the installation of electrical equipment on industrial / COMAH sites. It is required that the ideal candidate will hold current certificates for BS 7671 – 18th Edition, Testing Inspection C&G 2391-52 or equivalent, and also have the relevant industrial experience in these fields. You must be locally based in South Wales to apply for this position.

It is also expected that interested candidates will have experience working in either Industrial, Petrochemical, Chemical, Steel, Oil and Gas industries, or will have a similar background. Applicants will need to provide a CV which demonstrates industrial knowledge, an experienced background as well as relevant qualifications and references.
Qualifications

A recognised apprenticeship or training scheme
City & Guilds Part 1 & 2 Electricians Certificate, AM2 (or equivalent) or ONC or NVQ3 with relevant experience.
18th Edition IEE Regulations Cert
CCNSG Card
C&G 2391 Electrical Inspection & Testing

Certified Industrial Electricians Required: Please call +44(0)1792 897002 or forward your CV if you are locally based to Swansea, South Wales and available to [email protected]

For further information about C&P’s range of EPC EC&I Services, please click on one of the links below:

EPC - Electrical, Control & Instrumentation Engineering Solutions
www.cpengineering.co.uk

CompEx & Industrial Training Services www.cptrainingservices.co.uk

Hazardous Area ATEX Inspections & Consultancy C&P Engineering Services Ltd
www.hazardousareainspection.com

Safety Instrumented Systems, Implementation & Functional Safety Management
www.safetyinstrumentedsystem.com

08/12/2022

Today Carl Gwyther C&P Engineering Services Ltd Site Manager for Tata Steel handed over C&P's donation of a defibrillator to Tata Steel's Paul Boxer, Lloyd Bryant and Wayne Lewis at Morfa Coke Oven Project Office Area.

In purchasing the defibrillator from the charity "Jacks Appeal" the money raised from the purchase and donation to the charity also goes into the wider community.

Paul Bunyan - C&P's Managing Director said "It was a privilege to donate this life saving piece of Safety equipment. Hopefully, it will never have to be used, but at least it provides piece of mind in knowing that it's available for all contracting partners who are part of the Tata Steel Family."

02/12/2022

C&P Engineering Ltd have donated £1000 to sponsor three Scouts from the Draig A***n Unit in Penllergaer Swansea to attend a Scout Jamboree in South Korea in August 2023.

C&P’s MD Paul Bunyan presented the Scouts with the donation to help fund the trip.

Paul has fond memories of being a member of Cubs, Scouts and being a member of a newly formed Venture Scout troop with other enthusiastic Scouts and Girl Guides at the time. As a 17 year old his Venture Scout troop attended a regional Jamboree in the Cotswolds, ‘a great experience and great memories’.

The World Scout Jamboree (WSJ) is held every four years and is attended by over 40,000 Scouts from all around the world. In 2023, it will be hosted by the Korean Scout Association at a new site in SaeManGeum, South Korea.

Aled, Branwen & Gruff applied to attend the Jamboree after being observed at a Selection Weekend and completing the application form and video, after going through the course the three of them found out they were successful!

Aled said ‘It’s incredible to be honest, as the three of us are Explorer Scouts with the Draig A***n Unit. We meet weekly at Silver Cross Scout Campsite, Penllergaer. We are a District Unit serving the community and surrounding areas’.

‘It was a difficult application process but we made it through it and we will now represent Wales on the World stage. We’ve been set a target of £4,000 each to raise and your kind donation has been an excellent boost’.

‘We have done all sorts of fundraising events including regular curry nights at Raduni, Gorseinon. We have a 100 Club where members pay in £5 per month and we do a monthly draw and give out two prizes. We are up to 64 members and its slowly growing’.

‘Our latest fundraising venture is making reindeers from fallen trees to sell at Christmas. We are keen to be sustainable and sell a products rather than having to rely on kind donations like yours’.

Explorer Scouts are aged between 14 and 17. There will be 72 youngsters from across Wales attending this event and these will form two units each with 36 Explorers.

C&P Engineering wish Aled, Branwen and Gruff all the very best on their South Korean Adventure.

2023 The World Scout Jamboree is organised by the World Organization of the Scout Movement (WOSM)

01/12/2022

C&P Engineering Ltd would like to welcome the newest edition to its team!

Weighing in at 7lb 7oz and born on the 9th November Orla is a bright little spark in her C&P baby grow.

We wish her and her mum Chelsea all the best for the future. 🙂

22/11/2022

Control Panel Assembly Workshop Manager

Control Panel Assembly Workshop Manager based in South Wales, competitive salary, 33 days holiday (Inc. 8 days statutory).

The Company
Established in 1973, our rapid expanding company, C&P Engineering Services Ltd is an award winning Electrical and Instrumentation Services Company that has a reputation of minimising risk through safe, professional and versatile high quality Electrical & Instrumentation Services.
We have built up a reputation in a wide range of industries, namely the Chemical, Petrochemical, Steel, Water, Power Generation, Oil, Gas and Pharmaceutical industries. The vast majority of our Electrical and Instrumentation Services are carried out on COMAH sites and typically hazardous areas workplaces/environments that may contain or have activities that produce, explosive or potentially explosive atmospheres.
We provide vast ATEX experience and services to a wide variety of clients

The Role
C&P Engineering Services Ltd require the services of an experienced industrial control panel assembly manager to oversee the production of all bespoke electrical control and automation panels for a busy control panel assembly workshop.

If you know someone who might be interested in this role please share this post.

See More https://lnkd.in/eFy8W9Yv

15/11/2022

We are running the CompEx Ex11 Mechanical Course on the 30th January to the 1st February 2023 and there are a still a few places available.

The Ex11 Mechanical Course covers three days consisting of mechanical hazardous area awareness training, including the established CompEx Foundation Module (Ex F), with a written examination and finally overall core competency is validated with an installation and inspection practical assessment on mechanical equipment.

Ex11 follows a syllabus to enable safe working practices for the international standard ISO 80079 Parts 36 & 37 and allows employers to benchmark the core competency requirements of both their staff and sub-contractors.

Who Should Attend The Course?

Read More

www.cptrainingservices.co.uk/course/compex-ex-11-mechanical-course/

Please click the link below to book this course or share with anyone you think might be interested in attending this course.

www.cptrainingservices.co.uk/course/compex-ex-11-mechanical-course/

11/11/2022

C&P Engineering would like to welcome our New Apprentices

Our new Apprentices have just started and have been presented with their new tool kits by Paul Bunyan MD and Mark Howell QHSE Manager. The Apprentices shown are Jordan Shields TATA Steel, Connor Owen TATA Steel, Luc Gwilym BOC and Bradley Morgan BOC.

We wish them the best of luck in their new roles.

29/09/2022

Jo’s Story - ‘Well, I'm as chuffed as a Choo Choo train’!
Doing the CompEx Course has completely changed my life’!

When Jo initially applied to the C&P Training centre to do the CompEx Ex01 – Ex04 Gas & Vapours course she was working as a domestic electrician for several years and wanted to upgrade her skills & potential earnings by taking the industry recognised CompEx course which enables industrial electricians to work in potentially explosive areas.

Although the tutors were initially reluctant to let Jo take the course as she had limited industrial experience as a domestic electrician, she managed to persuade them that she had commercial experience she was determined to get the CompEx qualification to try & change her life & support her family.

When Jo arrived at the centre she met up with the C&P Training course tutors Dewi & Steve who helped, guided and supported her throughout the course.

Jo studied every evening after each day of the course to make sure she was fully prepared for the exams.

Jo received her results a week later from JTL & she was so thrilled to have passed the CompEx course that she wrote an email back to the course tutors to thank them.

This was an email that was received from Jo when she received her CompEx Ex01 – Ex04 results

‘Well, omg DEWI. I passed……..ME !!!??? Well, who has CompEx 01-04 …………….this girl here that’s who !!!!! Yesssssssssssss!!!!! Thank you soooooo freakin much for your fantastic tutoring :).
Jo (who as you may have guessed has passed her CompEx course !!). Whoop whoop !!!!!’
‘Well, I’m as chuffed as a Choo Choo train!! I cannot put into words how fantastic you and Steve were in your tutoring!! But my goodness you boys taught a domestic spark & I managed to pass the bloody CompEx course !! a million billion thanks to the both of you!‘

CompEx is the Gold standard in terms of qualification but once you have passed the course and you are on site, that’s when the learning really starts!

CompEx 01 – 04 changed my life, my career prospects, my earning potential and has enabled me to better myself and my Children’s lives that is what being a Mum is about setting an example and bringing up your children – they occasionally admit I’m a pretty cool mum for it too!

Over the years C&P Engineering has been actively involved in such schemes as Aspire2Be which encourages women to enter into the construction and manufacturing industries as electricians.

With only an estimated 1 to 3% of women being electricians in the UK there is an enormous potential for females to train and work within the industry.

Jo currently works as a CompEx Electrical Rope Access Technician on the Oil Rigs in the North Sea.

Please feel free to share and comment on Jo’s inspirational story to encourage others to get involved in the electrical industry.

For further information about any of our CompEx training courses please visit www.cptrainingservices.co.uk , email [email protected] or ring us on 01792 897 002

05/09/2022

Due to high demand we've just put an extra CompEx Ex12 Design Engineering Course on the 24th to 28th October 2022.

Please click on the link below for further information about the course.

https://lnkd.in/eu44Vpug

The Ex12 Design Engineer Course delivers in-depth competence based training and assessment in the application, design and selection of electrical equipment with the requirements of IEC 60079-14. This will relate to the electrical installation, design, selection and er****on in areas of explosive atmospheres.

05/09/2022

Last chance to register for Hazardex in the Regions - London Exhibition & Conference 14th September 2022

As one of the main sponsors C&P Engineering Services Ltd would like to invite you as our guest with a Complimentary Free Entry Pass to the one day Hazardex conference and exhibition which will be held at Hilton Dartford Bridge Hotel Dartford London – 14th September 2022

Sign up for your Free Pass Now!

https://www.hazardex-event.co.uk/London.aspx

Amongst the main Speakers (list shown below)
“C&P’s Principal C&I Engineer / Technical Director, Tal Hopkins will be discussing the complexities of Ex Product Marking.
Ever look at an Ex product certificate or the manufacturers label on Ex equipment and wondered what it all means?
Confused between square brackets, curved brackets, plus signs and forward slashes?
Bamboozled by upper case letters, lower case letters and T classification that also quote degrees C next to it?…
Join us for a brief technical discussion to help you decode the cypher and make sense of it all!
Hazardex in the Region events are the perfect platforms for topical discussion on process safety-related topics, sharing & learning about key industry information & sourcing product & service suppliers.
Conference Speakers at the Dartford event include:
Health & Safety Executive (HSE)
Update from the regulator
Tank Storage Association (TSA) - Peter Davidson, Executive Director
Prior use for non-programmable and fixed program language devices for IEC 61511
Chemical Business Association (CBA) - Douglas Leech, Technical Director
Offloading incidents during chemical deliveries
C&P Engineering - Tal Hopkins, Principal C&I Engineer / Technical Director
Issues of product marking
Trainor - Morten Aasen, Chief Commercial Manager & Rolf Kinck, Senior Instructor
Digitalisation and the advantages of e-learning
R&D Electrical & nVent Solutions - Neil Randall & Daniel Barron
Trace heating - why long term performance is critical to your process
Dekra Brain-centred performance: the final frontier in workplace safety
Attendance is FREE for a limited time only, register NOW @
https://www.hazardex-event.co.uk/London.aspx
https://data.imlgroup.uk/haz-in-the-regions/
More info about C&P's EC&I Turnkey Design & Engineering Services can be found @ www.cpengineering.co.uk

17/08/2022

Instrument Electrical Designer based in Swansea SA4
Competitive Salary and holidays

If you are seeking to work for a progressive company in an exciting period of growth, this is a great opportunity to progress your career.

As an Electrical and Instrumentation Designer you will provide engineering design support for a diverse range of clients up to an including Top Tier COMAH facilities.

Supporting the Principal EC&I Engineer you will ideally have sound knowledge of the ATEX regulations including Intrinsically Safe System Design as well as the requirements for other ATEX protection concepts. Initially focusing on supporting the retrospective generation of DSD loop sheets and Intrinsically Safe Calculations, the role will also include more diverse EC&I Design Responsibilities: -

Key Responsibilities:
• Prepare and check C&I detailed design documentation
• Work from P&IDs and site layouts
• Prepare and check C&I drawings including general arrangements, cables routes, block diagrams, loops sheets, hook-ups
• Prepare and check control panel designs including general arrangements and wiring diagrams
• Specify equipment and prepare and check C&I datasheets
• Prepare and check C&I schedules including I/O, cable, instrument list etc.
• Perform design calculations including IS, power, heat loss
• Prepare and check scope of work and other associated design documentation
• Liaise with other members of the design team
• Liaise with clients, contractors and vendors
• Work to client, national and international standards and regulations
• Adhere to company quality and standards
• Carry out work in a safe and effective manner
• Attend training, develop and maintain skills
The ideal candidate will have the following qualifications and experience:

Qualifications:
• HNC Measurement and Control or Electrical Engineering
Minimum Experience:
• Ideally apprentice trained electrical/instrumentation technician background
• 3 years C&I design experience minimum Gas and ATEX experienced Electrical design experience would be beneficial

Duties:
• Undertaking of site surveys
• Production of electrical & instrument concept designs
• Production of detailed electrical & instrument schematics drawings
• Production of design dossiers (site layout drawings, cable routing designs, cable installation drawings, cable schedules, instrument loops, DSDs, IS calculations, instrument specification, instrument hook ups, test documentation, etc)
• Perform lighting and heating calculations for internal and external locations
• Provide design support to installation teams
• Perform FATs
• On-site testing/commissioning
• Working in line with the company ISO9001 and QA documentation

To succeed in this role, you’ll also need:
• Excellent organisational and engineering skills
• Communication, team working and interpersonal skills
• Ability to work calmly under tight timescales
• Pro-active & attention to detail essential
• Good computer skills, Word, Excel Outlook
• Electrical & Instrumentation knowledge essential
• Understanding of control principles and circuits
• Knowledge/experience of Hazardous Area Protection methods/requirements
• Knowledge/experience of Auto-CAD
• Knowledge/experience of Trimble Pro-Design (Amtech) essential
• Minimum HNC/HND or graduate qualified
• 2 to 4 years relevant industrial experience
• Full UK Driving Licence

Job Type: Full-time
Salary: £40,000 - £42,000 per year

Schedule:
• Monday to Friday

Ability to commute/relocate:
• Swansea, SA4 9GE: reliably commute or plan to relocate before starting work (required)

Experience:
• Electrical Engineering: 1 year (preferred)

11/08/2022

C&P Engineering Ltd have just launched their New Catalogue.

Please click on the link below to view the digital version.

https://www.cpengineering.co.uk/wp/wp-content/uploads/2022/07/12751-CP-ECI-Brochure-Updates-22-interactive.pdf

If you would like any hard copies of this catalogue please contact

[email protected]

27/07/2022

Mechanical / Hazardous Area Project Engineer / Lecturer (ATEX) based in South Wales, salary £40-45K, 33 days holiday (Inc. 8 days statutory).
Immediate permanent position available for a Mechanical / Hazardous Area Project Engineer (ATEX) to join our experienced engineering team.

The Company

Established in 1973, our rapid expanding company, C&P Engineering Services Ltd is an award winning Electrical and Instrumentation Services Company that has a reputation of minimising risk through safe, professional and versatile high quality Electrical & Instrumentation Services.
We have built up a reputation in a wide range of industries, namely the Chemical, Petrochemical, Steel, Water, Power Generation, Oil, Gas and Pharmaceutical industries. The vast majority of our Electrical and Instrumentation Services are carried out on COMAH sites and typically hazardous areas workplaces/environments that may contain or have activities that produce, explosive or potentially explosive atmospheres.
We provide vast ATEX experience and services to a wide variety of clients

The Role

The Mechanical / Hazardous Area Project Engineer will be responsible for assessing, managing Mechanical / Hazardous Area Project work and planning, resourcing and coordinating inspection contracts. We also require them to be responsible for teaching the CompEx Ex11Mechanical course for which training can be provided.

The successful applicant will be responsible for:

• Project management of Mechanical / Hazardous Projects and inspection contracts, ensuring they meet their specifications, budgets and timescales whilst maintaining a high quality and safety performance.
• Liaising and communicating with clients & subcontractors. Visiting their sites for surveys and meetings.
• Producing project schedules and monitoring project progress.
• Producing Risk Assessments, Method Statements & Safe Working Procedures
• Assist in the allocation of labour & subcontractors
• Completion of Safety Audits, Inspections and reports
• Punctuality & conscientiousness
• Working hands-on when required
• Provide overall supervision & technical backup
• Assistance in the estimation of projects
• IT skills including MS Excel, Word, Outlook & design software (if necessary)
This is a key role within the business and as such we need a strong communicator who is able to liaise with a variety of clients. Experienced in working on hazardous area industrial plants is required, along with good industrial knowledge of mechanical installations installed in potentially explosive atmospheres.

Qualifications

• A recognised apprenticeship or training scheme
AND / OR
• Mechanical ONC or NVQ3 with relevant experience
AND / OR
• HNC or HND qualification
AND / OR
• Degree qualification in Mechanical Engineering

Desirable Qualifications

• Current CompEx Ex11 Qualification Certificate
• CCNSG Card
• IOSH or NEBOSH qualification

Desired Skills & Experience

• Have proven experience in a variation of process engineering sectors, preferably COMAH / industrial sites.
• A strong team leader with the initiative and drive to make a significant contribution to the organisation.
• The capacity to meet project deadlines
• The employee will need to be flexible as there may be overtime and other duties not mentioned in this job description.
• Must possess a strong commitment to Health & Safety, Quality & Environmental and attend meetings when required.
• Communication skills.

Please contact us via email [email protected] or Tel 01792 897 002

27/07/2022

Electrical & Instrument Project Engineer based in South Wales, salary £40-45K, 33 days holiday (Inc. 8 days statutory).
Immediate permanent position available for an E&I project engineer to join our experienced engineering team.

The Company

Established in 1973, our rapid expanding company, C&P Engineering Services Ltd is an award winning Electrical and Instrumentation Services Company that has a reputation of minimising risk through safe, professional and versatile high quality Electrical & Instrumentation Services.
We have built up a reputation in a wide range of industries, namely the Chemical, Petrochemical, Steel, Water, Power Generation, Oil, Gas and Pharmaceutical industries. The vast majority of our Electrical and Instrumentation Services are carried out on COMAH sites and typically hazardous areas workplaces/environments that may contain or have activities that produce, explosive or potentially explosive atmospheres.
We provide vast ATEX experience and services to a wide variety of clients

The Role

The E&I Project Engineer will be responsible for taking control of multiple demanding projects from estimation, client order, planning through to completion.

The successful applicant will be responsible for:

• Interpretation of customer design requirements from drawings, specifications, data sheets, etc
• Estimation of projects ensuring they meet their specifications, budgets and timescales whilst maintaining a high quality and safety performance.
• Liaising and communicating with clients & subcontractors. Visiting their sites for surveys and meetings.
• Producing quality control documents, project schedules and monitoring project progress.
• Preparation of material requisitions and organisation of subcontractor services.
• Writing, review and communication of Risk Assessments, Method Statements & Safe Working Procedures
• Preparation of construction site prior to the commencement of work
• Assist in the allocation of labour & subcontractors
• Completion of Safety Audits, Inspections and reports
• Punctuality & conscientiousness
• Manage project costs to ensure profit is maximised
• Provide technical and engineering support
• IT skills including MS Excel, Word, Outlook & design software (if necessary)

This is a key role within the business and as such we need a strong communicator who is able to liaise with a variety of clients. Experience of working on a COMAH site, knowledge of electrical testing and working in explosive atmospheres would be preferable.

Qualifications

• A recognised apprenticeship or training scheme
AND / OR
• City & Guilds Part 1 & 2 Electricians Certificate, AM2 (or equivalent) or ONC or NVQ3 with relevant experience
AND / OR
• HNC or HND qualification
AND / OR
• Degree qualification in Electrical Engineering

Desirable Qualifications

• 18th Edition IEE Regulations Cert
• CCNSG Card
• CompEx 01-04 gases and vapour qualification
• IOSH or NEBOSH qualification
• C&G 2391 Electrical Inspection & Testing
• Degree qualification in Electrical Engineering

Desired Skills & Experience

• Have proven experience of project engineering in a variation of process engineering sectors, preferably COMAH sites within the chemical industry.
• A strong team leader with the initiative and drive to make a significant contribution to the organisation.
• The capacity to meet project deadlines
• The employee will need to be flexible as there may be overtime and other duties not mentioned in this job description.
• Must possess a strong commitment to Health & Safety, Quality & Environmental and attend meetings when required.
• Communication skills.

Please contact us via email [email protected] or Tel 01792 897 002