Ardin Caspian Industrial Development PJSC

13/05/2016

08/02/2016

luxury n' commercial buildings/towers with Dieffe doors- Made in Italy.

“luxury n' commercial buildings/towers with Dieffe doors- Made in Italy…”

14/01/2016

Follow us on Instagram
https://www.instagram.com/ardin_caspian/

Industrial SCM company. Tehran-Dubai. نمايندگي انحصاري درب و پنجره هاي چوبي وآلومينيوم ايتاليا در ايران و خاورميانه Dieffe [email protected]

08/09/2015

“Type: Ciricr in italian walnut. luxury n' commercial buildings /towers with Dieffe - Italy…”

04/08/2015

Our strength in luxury...

23/07/2015

Caggiati Hygiene solution.

22/07/2015

Luxury defines our art of performance. Dieffe

21/07/2015

Luxury defines in Dieffe - for more info visit our website on www.ardincaspian.com

21/07/2015

Caggiati Maurizio siphon, a solution for customized drainage system.

24/12/2014

X- Mas Season’s greetings.

18/12/2014

Quality on which you can not compromise - Dieffe

09/12/2014

ONCE AGAIN !
ADOR WELDING’S CONTRIBUTION TOWARDS NATION BUILDING!!!

BAGGED ORDER FOR SUPPLYING WELDING AUTOMATION FOR CONSTRUCTING WORLD TALLEST RAIL ARCH BRIDGE ACROSS CHENAB RIVER

07/12/2014

Our Filling & Capping machines can be customized for every single production line from a jerry can to 220kg drum.
Fully fledged nozzles as how fast you need to conclude your packing's.

07/12/2014

Perfect Inverters

The spectacular display of products put up by Ador Welding during the recent ESSEN welding & cutting Exhibition held at Mumbai was a great attraction for visitors.
Ador showcased itself commendably as a Complete Welding Solutions provider that is has been for many decades now.

07/12/2014

Ador Welding's two stage "King regulator" ensures that maximum safety is provided to the users with the unique features like stainless steel diaphragm, stainless steel spindle & triple filter.

07/12/2014

Our cutting edge Italian origin doors open the vision to whom seeking luxury and quality...

02/07/2014

Ador welding is the complete welding & cutting solution provider.. We don't just sell products, we provide solutions..

17/05/2014

Friction-stir welding (FSW)
Is a solid-state joining process (the metal is not melted) that uses a third body tool to join two facing surfaces. Heat is generated between the tool and material which leads to a very soft region near the FSW tool. It then mechanically intermixes the two pieces of metal at the place of the joint, then the softened metal (due to the elevated temperature) can be joined using mechanical pressure (which is applied by the tool), much like joining clay, or dough. It is primarily used on aluminium, and most often on extruded aluminum (non-heat treatable alloys), and on structures which need superior weld strength without a post weld heat treatment.

It was invented and experimentally proven at The Welding Institute UK in December 1991. TWI holds patents on the process, the first being the most descriptive.

17/05/2014

Flux-cored arc welding (FCAW or FCA)
Is a semi-automatic or automatic arc welding process. FCAW requires a continuously-fed consumable tubular electrode containing a flux and a constant-voltage or, less commonly, a constant-current welding power supply. An externally supplied shielding gas is sometimes used, but often the flux itself is relied upon to generate the necessary protection from the atmosphere, producing both gaseous protection and liquid slag protecting the weld. The process is widely used in construction because of its high welding speed and portability.

FCAW was first developed in the early 1950s as an alternative to shielded metal arc welding (SMAW). The advantage of FCAW over SMAW is that the use of the stick electrodes used in SMAW is unnecessary. This helped FCAW to overcome many of the restrictions associated with SMAW.

14/05/2014

MEG

FORMULA
C2H6O2

DESCRIPTION
Monoethylene glycol (Ethylene glycol) is a colorless, virtually odorless and slightly viscous liquid. It is miscible with water, alcohols, aldehydes and many organic compounds. MEG will not dissolve rubber, cellulose acetate or heavy vegetable and petroleum oils. MEG has a low volatility and it is 50% more hygroscopic than glycerol at room temperature.

13/05/2014

Submerged arc welding (SAW)
Is a common arc welding process. The first patent on the submerged-arc welding (SAW) process was taken out in 1935 and covered an electric arc beneath a bed of granulated flux. Originally developed by the Linde - Union Carbide Company. It requires a non-continuously fed consumable solid or tubular (flux cored) electrode. The molten weld and the arc zone are protected from atmospheric contamination by being "submerged" under a blanket of granular fusible flux consisting of lime, silica, manganese oxide, calcium fluoride, and other compounds. When molten, the flux becomes conductive, and provides a current path between the electrode and the work. This thick layer of flux completely covers the molten metal thus preventing spatter and sparks as well as suppressing the intense ultraviolet radiation and fumes that are a part of the shielded metal arc welding (SMAW) process.

SAW is normally operated in the automatic or mechanized mode, however, semi-automatic (hand-held) SAW guns with pressurized or gravity flux feed delivery are available. The process is normally limited to the flat or horizontal-fillet welding positions (although horizontal groove position welds have been done with a special arrangement to support the flux). Deposition rates approaching 100 lb/h (45 kg/h) have been reported — this compares to ~10 lb/h (5 kg/h) (max) for shielded metal arc welding. Although Currents ranging from 300 to 2000 A are commonly utilized,currents of up to 5000 A have also been used (multiple arcs).

11/05/2014

Gas metal arc welding (GMAW),
Sometimes referred to by its subtypes metal inert gas (MIG) welding or metal active gas (MAG) welding, is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt, and join. Along with the wire electrode, a shielding gas feeds through the welding gun, which shields the process from contaminants in the air. The process can be semi-automatic or automatic. A constant voltage, direct current power source is most commonly used with GMAW, but constant current systems, as well as alternating current, can be used. There are four primary methods of metal transfer in GMAW, called globular, short-circuiting, spray, and pulsed-spray, each of which has distinct properties and corresponding advantages and limitations.

Originally developed for welding aluminum and other non-ferrous materials in the 1940s, GMAW was soon applied to steels because it provided faster welding time compared to other welding processes. The cost of inert gas limited its use in steels until several years later, when the use of semi-inert gases such as carbon dioxide became common. Further developments during the 1950s and 1960s gave the process more versatility and as a result, it became a highly used industrial process. Today, GMAW is the most common industrial welding process, preferred for its versatility, speed and the relative ease of adapting the process to robotic automation. Unlike welding processes that do not employ a shielding gas, such as shielded metal arc welding, it is rarely used outdoors or in other areas of air volatility. A related process, flux cored arc welding, often does not use a shielding gas, but instead employs an electrode wire that is hollow and filled with flux.

11/05/2014

Shielded metal arc welding (SMAW),
Also known as manual metal arc welding (MMA or MMAW), flux shielded arc welding or informally as stick welding, is a manual arc welding process that uses a consumable electrode coated in flux to lay the weld. An electric current, in the form of either alternating current or direct current from a welding power supply, is used to form an electric arc between the electrode and the metals to be joined. As the weld is laid, the flux coating of the electrode disintegrates, giving off vapors that serve as a shielding gas and providing a layer of slag, both of which protect the weld area from atmospheric contamination.

Because of the versatility of the process and the simplicity of its equipment and operation, shielded metal arc welding is one of the world's most popular welding processes. It dominates other welding processes in the maintenance and repair industry, and though flux-cored arc welding is growing in popularity, SMAW continues to be used extensively in the construction of steel structures and in industrial fabrication. The process is used primarily to weld iron and steels (including stainless steel) but aluminium, nickel and copper alloys can also be welded with this method.

10/05/2014

GAS pipeline Sub arc Flux welding - Ador Welding

08/05/2014

08/05/2014

Ador Welding

The CNC portal cutting machines are very precise and reliable. The portal cutting machine has one head for plasma sheet metal cutting and one head for flame ...

08/05/2014

ACR

Macchina riempitrice per cioccolata e prodotti ad alto contenuto di zucchero Velocità di riempimento 550 pz/h formato da 5 kg Formati accettati da 3 kg fino ...