IronMan Custom Fab

09/28/2019

This is an “Ugly Barrel” smoker. I was contacted by a customer that had a bunch of parts and an idea, but no way to put it all together. That’s where IronMan stepped in. We got it all fabbed up and then he took it to have it powder coated. We both agree that it turned out pretty awesome!!

09/28/2019

This is brand designed and fabbed for a couple to use in their wedding ceremony! They were beyond excited, and I am glad I had the opportunity to create this piece for them!

09/28/2019

Good day everyone! I realize it has been waaaaay too long since I’ve posted anything to the page. Stay tuned for a photo dump! Been busy around here lately!

This is a pair of cast iron grates for an antique stove that were broken directly in the middle when I received them. I got them welded up, repainted with high temperature paint, and returned to a happy customer!

03/29/2019

What do you do when you can’t find a new replacement part that you need? Make the best of it and spruce up what you have!!!

01/07/2019

What a beautiful day it is today! I told you I would upload some pics of the lighting change from halogen and incandescent to LED on our 2006 F250, so here they are!

Dual beam LEDs in headlights, H11 fogs, and Amber/white switchbacks for the turn signals.

I would also like to clear up a common misconception, as I have seen several memes out in Facebook land about LED and HID lights blinding oncoming drivers on the road. While this can happen, it is NOT because of the bulb type. It is because when a headlight bulb is changed to something other than what the housing was originally equipped with or designed for, they MUST be re-aimed and the correct beam pattern verified. If this is not done, they can absolutely blind oncoming drivers and cause a major safety hazard for everyone around.

A general rule of thumb to go by is that HIDs only belong in a projector housing and LEDs can go in either a projector or a reflector housing. Both, however, will need to be checked for proper aim before taking your new headlights on the road.

01/02/2019

Hello everyone! Hope you had a great Christmas and New Years! As some of you may know already, aside from metal fabrication, I also install aftermarket vehicle parts and accessories. Here are a few pictures of our 2017 Yukon that I did a complete changeover of all exterior lighting from incandescent and Halogen, to LED and HID. Check it out and be sure to ask if you have any questions. Stay tuned, in the next couple days I’ll be uploading pictures of the same process on our 06 F250.

09/21/2018

Finished product! This piece will be in the raffle to benefit Curt Mohr on Friday Sept 28th at the Andale football game!

09/20/2018

Sure there are other companies out there that do what I do, but here’s the IronMan difference. When you have a custom piece made by IronMan, you get an actual work of art, drawn and created by human hands, not a piece that was designed on a computer and cut out by a robot!

07/29/2018

Repaired broken ramp and replaced latches on this trailer. They were in terrible shape after years of use and abuse. Now they are new and will last many many more years!

07/29/2018

Custom bent A/C refrigerant line for a 71 Chevelle. I can custom make and install many different types of tubing, including transmission cooler lines, A/C lines, fuel lines, and more!

07/29/2018

This yard decor piece is a tree made of round bar and built into a 36” diameter ring!

07/29/2018

Hello everyone! It’s been awhile since I updated the page and added some more projects for you all to see! I’ve got some catching up to do! Enjoy, and as always, let me know about any of your custom fabrication needs!

07/29/2018

Yard art made out of rolled rings and different sizes of pipe.

12/05/2017

Installation of step bars on a brand new GMC 2500HD! I also install aftermarket vehicle accessories! Give me a call!

12/05/2017

These pics are of a trailer that had worn out gate holders and latches, so I re-worked them and made them better than before. I do all types of work from repairs to complete custom fabrication.

12/05/2017

Fire pit.

12/05/2017

I’ve been waaay behind on posting pics of recent projects, so here are a few. This is a plaque I made for a customer for her son based off of a picture of his dogs she gave me to work with.

07/13/2017

Here are some pictures of a recent job I completed for First Church of God in Newton. Outside handrails and some simple handrails for the steps coming off of the stage inside! Have a metal fab project you've been needing to get done? Give me a call!!!

06/16/2017

Crack repair on the deck of a John Deere mower.

06/16/2017

Remember, custom fabrication is not all I do. I can do weld repairs, and can also install your aftermarket accessories on your vehicle! Here are a couple quick before and after pics of step bars installed on a 2003 GMC Sierra.

06/15/2017

This project holds a special place in my heart. It was designed, fabricated, and painted for a couple in memory of their infant daughter. "Liv On" represents her name which is Olivia. Thank you for allowing me to be a part of her memory. 💜 Stephanie Salmans

05/24/2017

IronMan's latest project! A client wanted this custom made as a gift! Thank you Chelsee Cox!!!

03/31/2017

Also a quick peek at a couple of small items for my sister and her business partner's salon. I'll post pictures of the completed sign when they get everything on the wall!

03/31/2017

Here are some pics of my latest job, a 20"x36" cross for the Brasser family! Hand cut, mounted, blued, and clear coated. Give me a shout for your custom fab needs, whether it be repairs, or custom designed work such as this piece!

03/11/2017

Rust repairs, stress crack repairs, and body mount reinforcements on a 67 El Camino frame.

02/27/2017

A customer contacted me about a commercial hotdog cart she wanted to get back into compliance with health code and needed a 4 compartment sink to meet code. One compartment need a raised divider to distinguish it as the hand washing sink. This was fabricated out of 18 gauge stainless steel. Check it out!

02/27/2017

Install and finished product pictures from a handrail job I completed for a customer. Give me a call for any of your welding and custom fabrication needs!

08/28/2016

Decorative handrail job I've been working on for a client. Next up, powder coat and final install! Stay tuned for pictures of finished product!!!

07/09/2016