Jean Field Services

Jean Field Services Call any time for any field service needs, welding roadside service, heavy equipment repair. 8 years experience in the field, 3 years dock repair and welding.
(1)

Carbon steel, galvanized steel and aluminum repair experience.

Don’t feel like picking those sticks up out of the yard? Neither do we! Come let us set the factory 30 degree edge back ...
06/02/2023

Don’t feel like picking those sticks up out of the yard? Neither do we! Come let us set the factory 30 degree edge back on your blades! We can sharpen them for 25 dollars a set! Come se us before the grass gets to tall!

Here’s a few pictures of the 5 bars that were broached today, all that’s needed for these to go to work is a keyway.
05/31/2023

Here’s a few pictures of the 5 bars that were broached today, all that’s needed for these to go to work is a keyway.

05/31/2023

Tyler is broaching our shop made boring bars for the bb4500 portable align boring machine.

Here are yesterday’s results, this is a bucket with additional thumb pin for a Takeuchi mine excavator. This customs hav...
05/05/2023

Here are yesterday’s results, this is a bucket with additional thumb pin for a Takeuchi mine excavator. This customs having repeated issues of the oem pin breaking so we manufactured one from 4140 heat treated material for more flexibility without breaking but strong enough to carry the load of the thumb.

Stick around later today to see what beautiful creation Tyler whips this piece of heat treated 4140 solid stock.
05/04/2023

Stick around later today to see what beautiful creation Tyler whips this piece of heat treated 4140 solid stock.

04/27/2023

Been out of the shop for a few weeks with the arrival of a new baby but Tyler has been holding the fort down, here’s a little boring mill action from yesterday. We’re prepping this part for a sleeve and a little weld build up where a race spun in another bore.

What an eventful day! We had one of our large customers come in today at 10 this morning with this part. They said we ne...
03/25/2023

What an eventful day! We had one of our large customers come in today at 10 this morning with this part. They said we need 8 of these but 4 right now would be great! Tyler knocked the precision matched machine work out of the park today on such a short notice. We were able to sketch the bosses welded to the plate and had a very good friend whip them out for us today since our plasma is down at the moment. Everything came together perfectly just in time.

Thank you to the City of Cordova for your continued business, this was a challenging repair but we got the root cause of...
03/19/2023

Thank you to the City of Cordova for your continued business, this was a challenging repair but we got the root cause of some shelving broken free from the body handled and back into service with all their equipment back on the truck.

Need custom heat treated pins for equipment? No problem, this customer was not having good luck out of oe pins for a pre...
03/19/2023

Need custom heat treated pins for equipment? No problem, this customer was not having good luck out of oe pins for a prentice knuckle boom log loader. We machine them a very nice pair of 4140 heat treated pins. No matter the need, call or send us a message!

Looking for production runs? We can handle those too! This was a simple maintenance project for one of our customers whe...
03/19/2023

Looking for production runs? We can handle those too! This was a simple maintenance project for one of our customers where their rollers were in need of new bushings and the rollers themselves were worn. 16 pins and rollers ready to go!

We e been busy lately so here’s a photo dump in a few posts, we had a customer come to us looking for a solution. They h...
03/19/2023

We e been busy lately so here’s a photo dump in a few posts, we had a customer come to us looking for a solution. They had some plastic rollers that were only lasting a few months and were extremely expensive. We had some sample parts to work off of and the bearings to measure. While manufacturing the new parts we foursome dimensional issues with the sample parts and corrected those. Be sure to call us with any issue or repairs, we most certainly can find something to help with your problems.

Sent out a 2 15/16 shaft today with a couple key ways this evening.
02/25/2023

Sent out a 2 15/16 shaft today with a couple key ways this evening.

Couple action pictures of the parts we set out last week installed on the machine.
02/22/2023

Couple action pictures of the parts we set out last week installed on the machine.

Fresh remanufactured parts going out today.
02/16/2023

Fresh remanufactured parts going out today.

02/15/2023

Had the boring mill in action yesterday, we’ve been loaded up with work lately and have not had a day off. We appreciate everyone’s business and support!

02/11/2023

Here’s a quick clip of the cat axle mount in the weld positioner ready for preheat and weld.

Busy Saturday at the shop, one of our customers had a 911 thread repair on an interesting cylinder. Build up welding an ...
02/11/2023

Busy Saturday at the shop, one of our customers had a 911 thread repair on an interesting cylinder. Build up welding an axle trunion mount out of a Cat 966 F loader and all the while playing on the tv! Call us anytime for your machine, equipment, welding or fabrication needs!

Tyler has the mics out this morning preparing for a skim cut on these cat loader parts for weld build up from a bearing ...
02/06/2023

Tyler has the mics out this morning preparing for a skim cut on these cat loader parts for weld build up from a bearing failure.

Putting this hydraulic cylinder back together this morning for a in house rod replacement. We have always rebuilt cylind...
02/06/2023

Putting this hydraulic cylinder back together this morning for a in house rod replacement. We have always rebuilt cylinders but now have a direct vendor for honed tube for barrels and chrome rod. Give us a call for any repair or maintenance needs!

Here’s some fantastic looking 932 bronze bushings with grease worms Tyler whipped out for one of our customers. We’ve up...
02/02/2023

Here’s some fantastic looking 932 bronze bushings with grease worms Tyler whipped out for one of our customers. We’ve updated our system this year and will be tracking our parts with a barcode system for easy reorder on consumable parts, just another way to help every customer stretch a dollar further and make the process of getting back up and going a little easier.

01/28/2023

Entry level manual machinist position for Knee mill, Boring mill and Lathe. Seeking college student or someone with machine work experience. There will be on the job training, having your own tools and measuring equipment is highly recommended. However the shop has some measuring equipment. Pay will be based on experience and tools. This will be a part time position and will more than likely become full time.

01/23/2023

We're looking for help! Jean Field Services is growing and so is the work load, we are looking for an entry level machinist to train on site in a part time setting. School hours can be scheduled around for a college student. Wages contingent on experience and tools we do not have to supply. Message us for details!

EDIT: This a manual machinist position not CNC

01/05/2023

Some sights and sounds from the shop today.

Some parts going out of the shop this morning, these tapered metric pins were all made off of a sample part supplied by ...
01/05/2023

Some parts going out of the shop this morning, these tapered metric pins were all made off of a sample part supplied by the customer and the yellow bushings in the housing received a sleeve from bushing failure. The initial plan was to weld the housing but we later decided it would be better to bore the part and sleeve it instead of putting so much heat in the housing.

Merry Christmas from us here at Jean Field Services’ may you all have a wonderful holiday’s!
12/25/2022

Merry Christmas from us here at Jean Field Services’ may you all have a wonderful holiday’s!

12/21/2022

Tyler was broaching a keyway in this drive sprocket with our Caitlin keyseater this machine is over a hundred years old and still making parts.

12/21/2022

Got our boring mill ready for its first job, this has been a work in progress that we purchased back in August. Just needed a little cleaning, love, and some bearings. Now it’s ready to add another great service to our existing customers and offer avenues for more.

Had this part come it to be bored and bushed, after Tyler had assessed the part he found a stress fracture in the base p...
12/19/2022

Had this part come it to be bored and bushed, after Tyler had assessed the part he found a stress fracture in the base plate and it was decided to make a new part over salvaging this one.

Slight change of pace from machine work and heavy equipment, managed to get this 57 Chevy 4 link kit mostly tacked up to...
09/29/2021

Slight change of pace from machine work and heavy equipment, managed to get this 57 Chevy 4 link kit mostly tacked up today for a customer. There’s nothing quite like freshly sandblasted parts and a clean axle housing when you’re fabricating. Will have some pictures posted up when this project is complete this week.

Address

Cordova, AL

Telephone

12055227759

Website

Alerts

Be the first to know and let us send you an email when Jean Field Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Jean Field Services:

Videos

Share


Other Cordova travel agencies

Show All