D & B Fishing Charters

08/27/2024

Started on the hardtop, first have had to cut in these chases for lights. Next I have a couple other chases to cut in, but first have to seal these back up. Then I get to make it look as if I were never there. Stay tuned, there’s a lot going on with this thing

08/16/2024

Our next item checked off of the list, are the windows, install complete both sides. Dark tint, gonna be nice

08/09/2024

So we started from a piece of paper to make these light pods for the hardtop, a triple light set, and a single

08/09/2024

This piece is a mount on the hardtop for the new radar up forward, and a KVH satellite aft

08/09/2024

Fiberglass fabrication is challenging, and I’m enjoying the challenge! From a drawing on a table, to the full form

07/31/2024

We had to make a couple small changes, sanded it back, and primmed this console up for a second time. Priming twice only helps the finished product, well worth the extra time

07/26/2024

Really enjoying this custom work

07/26/2024

Mr Bill Weldon with a little fine tuning, and then he said” let’s make it look like we did something “

07/19/2024

Also this week we had a poly fair bonanza, smoothing out the console, cut access hatches, and started installing drain for hatches. Keep moving forward

07/19/2024

This week built the fish box lid, did a bit of fine tuning on the box and receiver. A little more to make it right, and it’ll be ready for installation

07/10/2024

We were also able to get fish box glassed, added center sump, and foam insulation. Glassed out, and in, rolling along &sboats

07/10/2024

4 gallons later😂console is ready for fairing &s boats

07/03/2024

Well, check this out, we have a partial back deck. It’s put up temporarily, and we have several things to finish underneath to get ready for fuel tanks, but we’re moving forward day by day. Now for some fun, fabrication! There’s a lot to build, and it’s time to do that fiberglass guy stuff. &sboats

06/29/2024

This week forward steps were added. A bit more was done to further complete engine room. Steady as she goes &sboats

06/21/2024

Well, well, flooring close, a couple things to tidy up, and a couple more drop ins to build. Hatches built, center drop in center hatch is built. Now to take all of the decking back out, and paint floor supports. Moving right along &sboats

06/19/2024

Yesterday back wall, today salon deck. Those ACs helped, and we were able to get most of the salon floor taken care of. &sboats

06/19/2024

So we all know it’s been a bit hot, well we decided to fix it

06/18/2024

While I was getting rid of old Detroit paint, Mr Weldon was doing his thing. A few minor adjustments to make, and just like that, we have a wall. We’ll make it permanent a bit later, but it’s in there &sboats

06/18/2024

The Weldon family helping out a bit with some paint slinging today, looking pretty good &sboats

06/14/2024

Got it primed up, still have thru holes, and shaft logs to replace, but we’re moving forward &s

06/14/2024

Been grinding away at old oil soaked paint, and put in forward decking for pump room &sboats

05/31/2024

Hey there, sometimes you just have to cover up and embrace what’s coming, a straight up butt whoopin! We’re still winning, &sboats

05/27/2024

Carrier beam, forward deck for soon to be pump room, and new wall for rebuild bathroom, build back piece by piece &sboats

05/23/2024

I know it doesn’t look like much, but for and myself, this is a big deal. Demo is about complete, and we’re starting to build some pieces back! Progress!

05/04/2024

There is now an open floor plan on this G&S, we also added a sunroof &s

05/03/2024

You never know what you’ll come across when you’re tearing into a boat. Wonder what happened here? Surprise! &S

05/02/2024

05/02/2024

Got to sling some primer today, started to work on some painting tips from , more to come!

05/02/2024

Definitely getting into the grove, time for first prime, and seal it up

02/11/2024

And when it’s raining, getting a little done at the shop, jet ski repair