Precision Truck Equipment

17/03/2023

15/09/2022

Here are a few take aways:
1.) This is not earth shattering work, I know.
2.) When your 19 yr old (and newest) employee has attention to detail and gets everything in the dash in a clean and accurate manner......thats cool!
3.) Used truck or new, give everything ya got for the customer.

Thats all, have a great day.

13/09/2022

Seriously though, that sticker that says "do not fill past this line" is not a recommendation. 🤦‍♂️🤦‍♂️🤦‍♂️

19/04/2022

We had a strange request from one of our customers. They bought a new that weighed around 7500lbs and was hanging on 90" of after frame. This resulted in too light of a steer axle load when the truck had no load on it. Hiab told the end user to put 2300lbs of weight on the bulkhead of the flat bed. We see things a little differently. 1200lbs on the front of the truck yielded the same load on the front axle with minimal payload lose. Also, keeping the weight lower keeps the CG lower.

07/04/2022

Turn and burn!

31/03/2022

Still some of the best customers ever!

28/03/2022

Well the Morooka has a fifthwheel!

24/03/2022

It's junk! Always make sure the jaws are OPEN before backing under a trailer!

23/03/2022

It's that time of the year..... Dump bodies!
Makes one of the best beds on the market. The nicest part is that you order your body just like you build your house. You choose what YOU want. It's not a cookie cutter bed.

15/03/2022

Check it out!!! This is the truck from the show. If anybody has any questions shoot me a message!

14/03/2022

A little pintle hook addition to this tractor!

10/03/2022

The full clip didn't post to my story for some reason!

08/02/2022

Hands down the longest PTO I've ever seen! This is a Chelsea 892 pto for use on Allison 4700 series transmissions. Keep in mind that is a fullsize dump pump attached to it!

19/09/2020

is looking fresh with some new paint, fenders, and blower!

15/02/2020

This build has been a very interesting build due to the fact that modern Ram, Ford, and GM trucks have a fuel tank all the way to the rear of the chassis. The rear cross member holds the 55 gallon fuel tank up. As a result the hinge cannot be coped into the rear of the chassis. Time to get a little creative.

15/02/2020

A little custom step addition to a Mack R-Model tank.

09/01/2020

If you are in the market for some counter weight for your Freightliner M2, we have the solution! 1200lb front bumper should do the trick!

23/12/2019

***For Sale***
New take off Fontaine 8" tall subassembly.
$700 ea