Delta Vehicle Systems

  • Home
  • Delta Vehicle Systems

Delta Vehicle Systems Our designs are born out of true outdoor and racing experience to make our solutions strong, sophist
(5)

Gahdang.  just had one of these dropped at the shop for the shop 80 Series  build. Pretty fancy, nice work  ! Now need t...
12/07/2024

Gahdang. just had one of these dropped at the shop for the shop 80 Series build. Pretty fancy, nice work ! Now need to figure out if there enough room under the hood for the monster.

Chipping away at the  swap package. Decided to toss a few of the fine companies whose products are being incorporated in...
09/07/2024

Chipping away at the swap package. Decided to toss a few of the fine companies whose products are being incorporated into the kit on the custom valve cover (for shop rig, won’t be required for others).

  dreams
14/06/2024

dreams

Do you have big nuts you need to get off? Maybe a front nut and a rear nut? Well this modded 54mm socket is what you’re ...
12/06/2024

Do you have big nuts you need to get off? Maybe a front nut and a rear nut? Well this modded 54mm socket is what you’re looking for. It is notched for the three posts on the rear axle hub nut of 93-97 80s and appropriately sized for the front spindle nut of all 80s.

Made by a machine shop and previously sold by a now shuttered company, just added to our site and in stock ready to ship. , per usual.

https://www.deltavs.com/all-products/54mm-hub-nut-tool

Haven’t seen this until  stopped by to show us his bumper install. If you look reeeeeeeal close, you can see the Delta l...
10/06/2024

Haven’t seen this until stopped by to show us his bumper install. If you look reeeeeeeal close, you can see the Delta logo underneath the topo wrap on our NATO can holders. Pretty cool!

GEN2 front bumper is on the site now too. All KINDS of new little improvements, just like the new rear bumper.
21/05/2024

GEN2 front bumper is on the site now too. All KINDS of new little improvements, just like the new rear bumper.

GEN2 80 Series rear bumper is now live on the site
17/05/2024

GEN2 80 Series rear bumper is now live on the site

New rear bumper about to drop
16/05/2024

New rear bumper about to drop

New  is even better in person. If your travels take you through Salt Lake City, it’s a never miss spot for sure. Couple ...
25/04/2024

New is even better in person. If your travels take you through Salt Lake City, it’s a never miss spot for sure. Couple minutes off the freeway, you have NO excuses!!

 is a great time. If you haven’t been (and even if you have!) be sure to add it to next years calendar.
19/04/2024

is a great time. If you haven’t been (and even if you have!) be sure to add it to next years calendar.

Got a sweet pic from  this morning of a 60 Series with some special sauce. Love seeing it our parts get used in unique w...
11/04/2024

Got a sweet pic from this morning of a 60 Series with some special sauce. Love seeing it our parts get used in unique ways.

   conversion, second attempt (4bt was too loud and not enough fun). Doing a fit check for the engine with the outer fen...
27/03/2024

conversion, second attempt (4bt was too loud and not enough fun). Doing a fit check for the engine with the outer fenders removed, it’s quite apparent how nicely our 5L arms, our bumpstop kit, and 37” tires work together.

Woohoo, our first jeep part!! jkjkjk it’s only for offroad vehicles. Our new MMR (MagBak-MagSafe-RAM) phone mount is now...
22/03/2024

Woohoo, our first jeep part!! jkjkjk it’s only for offroad vehicles. Our new MMR (MagBak-MagSafe-RAM) phone mount is now on the site (“link in bio” of course). This phone mount is a super minimal and clean solution for hassle-free phone access, whether you’re texting and driving, falling off Black Bear Pass because you’re tryn to take a sick pic, or constantly in-n-out of your rig delivering “pizza”.

The mount is specific to phone cases that are MagSafe compatible. All iPhone 12 or newer, Samsung S23 or newer, and Google Pixel 6 or newer are good to go.

MagBak cases have a magnet in them for extra retention. These have proven to be awesome when working on rig, can stick to door/fender/etc to get that YouTube mechanic cert as you follow along. Our mount takes advantage of this case magnet, the MagBak “MagStik” magnets (two of which are included with each phone case), AAAAND the MagSafe magnetic wireless charger for the most magnetic retention you can get. We then stuck a 1”ball on the back of it so you can use all the sweet attachments and get the phone in the exact right spot.

For our precious Land Cruisers, it pairs nicely with our 91-94 80 Series clock replacement mount, the .end useless cubby insert, and is working on a drop-in retainment setup for the 95+ dash. For all other vehicles, you just need the standard RAM mount setup.

Dreaming of warm summer days and fast dirt roads with no one to be seen for miles in all directions.
04/03/2024

Dreaming of warm summer days and fast dirt roads with no one to be seen for miles in all directions.

The DeltaVS PROharness map is now available for free download on our site (link in bio). This outlines and explains each...
15/02/2024

The DeltaVS PROharness map is now available for free download on our site (link in bio). This outlines and explains each subsystem of our harness kits as well as tying them all together in a completed, overall kit. If you’ve been thinking about (and probably getting overwhelmed by!) upgrading your rig with a dual battery kit, pulling power into the cab from an existing setup, adding rock/reverse lights, getting more power to your .end QPM from a DeltaVS center console or .pros.official 9100, or any number of other power related adventures, this map will help you understand the entire system. It also breaks down each of our PROharness kits individually, and then ties them together as an entire system for the “40,000 foot view” of what it takes to have a solid power distribution system. If wiring is not your bag, baby, we’ve got you covered. All of our wiring kits are in stock and ready to ship out to help you get this project squared away.

DeltaVS PROharness lineup about to launch. If you’ve been apprehensive about power distribution or don’t want to spend t...
05/01/2024

DeltaVS PROharness lineup about to launch. If you’ve been apprehensive about power distribution or don’t want to spend the money on proper crimping tools, we’ve got you covered. Built with the same parts and techniques used on racecars, these harnesses are built to last years without fail. Waterproof connectors, waterproof heat shrink, continuous anti-chafe, you know, the goodstuff. Everything from upgrading OEM ground wires to getting safe power from your .pros.official 9100 to your .end QPM, lights on every corner, BlueSea power distribution and controls, dual batteries, center and shifter console power, and everything in between. Keep an eye on the site (will announce here when listed as well) and start rubbing your pennies together!

Nothing better than adventuring in your 80. Some great new spots were discovered this trip. Product testing at its fines...
08/12/2023

Nothing better than adventuring in your 80. Some great new spots were discovered this trip. Product testing at its finest.

80s doing 80 things. Product testing is an excellent excuse to get out and enjoy the great outdoors.                    ...
02/12/2023

80s doing 80 things. Product testing is an excellent excuse to get out and enjoy the great outdoors.

Choose Delta when you head out, so you can make it home too
01/12/2023

Choose Delta when you head out, so you can make it home too

Here you go folks. This is almost exclusively 80 series stuff, one 100 series bumper piece (will also work with the abou...
25/11/2023

Here you go folks. This is almost exclusively 80 series stuff, one 100 series bumper piece (will also work with the about to be released updated 80 bumper).

If you have any questions about any of the coupons for clarity REPLY HERE.

The coupons SHOULD be pretty self explanatory if you’re familiar with our catalog of products. Some of these there are more than one of, most of them there are only one of. If the coupon doesn’t work it’s most likely because someone else used it already. If you have any questions, see above.

These coupons are useable from Nov 24-27 2023.

These coupons are “single use”.

There will be NO RETURNS for items purchased with these coupons. THESE ARE ALL BLEM ITEMS IN SOME WAY OR ANOTHER. FULLY FUNCTIONAL BUT DON’T PASS MUSTER IN THE LOOKS DEPT.

All the coupons with RHD or LHD are for shifter consoles.

This is the first time trying a sale like this, if you find a loophole, it’s due to an honest mistake. Please contact us directly and let us know. If this gets abused in any way it will never happen again and all the orders will be cancelled.

If you have multiple items in your cart and one of them is eligible for a coupon, it should work just fine.

If you have two items in your cart that are both eligible for coupons, you have to check out twice.

UH-OH SPUHGETTI-OH. Any guesses what we are up to now?
24/10/2023

UH-OH SPUHGETTI-OH. Any guesses what we are up to now?

New slaps going in random order boxes for the next bit. IYKYK
13/10/2023

New slaps going in random order boxes for the next bit. IYKYK

Finally had a couple opportunities to test out the  Lithium Cube 1200 over the last few months. First adventure was the ...
12/10/2023

Finally had a couple opportunities to test out the Lithium Cube 1200 over the last few months.

First adventure was the shop camp trip where our fridge lost its internal 12v power circuit, so could only run off 110v. Lithium made that really easy, just kept it charging at all times via 12v (where the fridge would normally be plugged in), then plugged fridge into 110v outlet on cube. Ran without issue non-stop for rest of trip (3 days). This saved hundreds of dollars worth of food purchased for our multi-day, multi-person trip.

Also used the Lithium Cube to charge multiple handheld radios via 110v AC. A bit overkill for that task but worked without issue.

Will report back on other uses so stay tuned.

Keep tabs on our site for these to be available as well.

Drum roll please…for the first time in over three years, all radius arms have shipped AND we have a handful left over of...
09/10/2023

Drum roll please…for the first time in over three years, all radius arms have shipped AND we have a handful left over of ALL sizes. Get em while they’re hot. All of them have bushings installed so order with those to have them ship same/next day.

Of note, we are no longer going to produce 6” arms, as the 6” arms are great and that’s what you should get. Once these are gone, there will be no more.

Check out the tags for shops that can sell to you if don’t want to buy from us (??what’s wrong with you??).

Bumpers and sliders are coming along as well. Should be available for ordering again in the not too distant future.

While it’s true events like  Rubithon provide great opportunities to test yourself and your rig, they’re really about me...
11/09/2023

While it’s true events like Rubithon provide great opportunities to test yourself and your rig, they’re really about meeting new people and making new friends.

Experiencing the Rubicon Trail for the first time at the AWESOME,  event
08/09/2023

Experiencing the Rubicon Trail for the first time at the AWESOME, event

Product testing is always the worst…
24/08/2023

Product testing is always the worst…

21/08/2023

That one time taking the shop   through   with  and the steering rack popped off. Holding it in place with a small ratch...
04/08/2023

That one time taking the shop through with and the steering rack popped off. Holding it in place with a small ratchet strap kept it going long enough to get home.

📸:

When you buy your 37”  KM3s from  because they said they will 100% mount your  ReboundPRO wheels, but then change their ...
03/08/2023

When you buy your 37” KM3s from because they said they will 100% mount your ReboundPRO wheels, but then change their mind when you drop the wheels off, what do you do? Well, best bet is to do it yourself, like most things. Fb marketplace had a budget tire machine just waiting for us to get busy mounting these sweet meats with. Can’t wait to get these bad boys on the trail!

Address

ID

Alerts

Be the first to know and let us send you an email when Delta Vehicle Systems posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Delta Vehicle Systems:

Videos

Shortcuts

  • Address
  • Telephone
  • Alerts
  • Contact The Business
  • Videos
  • Claim ownership or report listing
  • Want your business to be the top-listed Travel Agency?

Share