Nedrob Custom Cases

  • Home
  • Nedrob Custom Cases

Nedrob Custom Cases Custom cases. Total protection of your valuables. Many styles and colours to choose from. If you can think of it, we can do it together! to a custom machine case.
(1)

Building custom road cases for musicians, and other professions of all types! I've had the opportunity to branch out my business to other catagories than musicians. I've built custom make up cases, gun cases,and have learned alot of the tattoo industry. Building a custom travel case for their gear ( inks, tubes, pedals etc..) I'm more than willing to try new cases for any trade !

Finished up a gear case for Chris at AbsoLIVE mobile stages. Thank you Chris for your trust ! I hope it meets your expe...
20/11/2022

Finished up a gear case for Chris at AbsoLIVE mobile stages. Thank you Chris for your trust ! I hope it meets your expectations !

I just finished assembling one of these amazing cases !Lightweight , blow molded panels. 4 handles , 2 large lid stays a...
20/09/2022

I just finished assembling one of these amazing cases !
Lightweight , blow molded panels. 4 handles , 2 large lid stays and 2 latches. All on 4” swivel castors , 2 with foot brakes !
They can be configured to almost anything you want !
2 different sizes are available !
Each one is waterproof , each capable of holding 500lbs and they’re stackable ! Castor cups built into each lid !
Let me know if your interested in any way , I’ve just got to nail down pricing and availability.

Thanks again to Severin Gage for the trust in building him a custom case for his 2 Phaez heads. Took me a bit but got he...
14/07/2022

Thanks again to Severin Gage for the trust in building him a custom case for his 2 Phaez heads. Took me a bit but got her done !

Last case of the year.
20/12/2021

Last case of the year.

14/12/2021

I’ve got a case on my work bench waiting for a new owner ! The inside dimensions are 16 3/4” x 14” x 7”. With the material turned around , it has the black laminate on the inside, which makes it super durable !
I’ll put a couple of lidstays , a latch and a couple of handles on it, and all the other hardware too !
I can make it to your choice of Color I have in stock.
Red
Pink
Light gray
Dark gray
Purple
Navy blue
Pick a colour and pick how you want the case configured……..$300.

Let me know if you have any questions.

20/10/2021

Hey everyone !

I’m going to be building a few quick cases out of some old stock that I have just to shake the cobwebs off !

I’m going to do them in coloured laminate. I’ve got wine red(brownish), pink, purple, light and dark gray, red and navy blue.

One case is 15x17x8 1/2 and one 10x12x5. (Outside dimensions)

The third case will be about 19x9x6.

Let me know if your interested in anything and you’d be able to pick which colour you want !

Let me know !

Thanks to Chris Rafinski for trusting me for his new case for his Mesa Recto amp. I built him a case for another amp tha...
17/04/2021

Thanks to Chris Rafinski for trusting me for his new case for his Mesa Recto amp. I built him a case for another amp that he has over 10 years ago..... and yes he still has it !
Thanks again Chris ! I hope it doesn’t take another 10 years to see you again !

New blue custom case coming up ! This one is different . I’ve designed and built a frame for some Doepfer synthesizer co...
19/02/2021

New blue custom case coming up ! This one is different . I’ve designed and built a frame for some Doepfer synthesizer components. This is new to me but look forward to the challenge !

New case finished for Richard Richard J Hebert. Custom fit for his effects pedals and cables. Thanks Richard !
11/02/2021

New case finished for Richard Richard J Hebert. Custom fit for his effects pedals and cables. Thanks Richard !

11/08/2020

Now we’re stylin’ ..... I just gotta find a way to get that squirrel outta there ..........

27/07/2020

Just finishing up and doing the small details. Full setup for a Markbass. Combo amp on top, 4U setup in the center on top of a 2X10 amp on the bottom. Thanks Frank Coppola for the challenge !

02/07/2020

Ever try to build an airplane in your basement .......

18/06/2020

Made my daughter a quick “gear” case. Since she bought herself a Kawasaki dirt bike, I did it in her colours !

12/06/2020

New colour from Penn-Elcom. Kind of an aqua blue with a bit of teal to it. Just whipped this up to try it. 20” x 13” x 6” inside dimensions. Layered with 1” plank foam. Cut in whatever you want to protect. PM me if your interested in purchasing.

01/06/2020

Sort of a new colour from Penn-Elcom. Like an Aqua blue with a deeper tone to it. Very limited sheets available. Should look good once the hardware is around it. I’m going to whip up a test case to see how it looks !
What do you think ??
More pics to follow !

22/04/2020

Harley Davidson inspired colours for case. Made for “sh*ts and giggles” out of some spare material.
What do you think ? Would there be a market for cases of this combo ? Helmet cases ....... let me know !!
I think I’ll go through my coloured laminated and make a case out of the different ones !

17/04/2020

I hope this will make things a little easier !

17/04/2020

VOX AC 30 custom case going out to Rick Rock this afternoon. 1 down ...... 1 to go. Thanks Rick !

09/04/2020

Just finished an amp case for Nathan Schiller , for his 1965 Deluxe Reverb ! Can’t wait to get some pics with the amp in the case !

07/04/2020

I really love using these castors from Penn-Elcom ! Super durable and they lock in 2 places ! On the wheel and it locks on the swivel. Truly the best castor out there !

02/04/2020

Feels good to be back in the workshop after almost 6 months !

27/11/2019

Going out to the Rivolta boys this evening ! Using the new material from Penn-Elcom. Ultra lightweight and I really like the “ carbon fibre “ look of it all. The larger case only weighs about 25 lbs. if it were out of the plywood material I usually use , it would be closer to 45 lbs.

10/11/2019

Pretty well all buttoned up. All the ball corners are on and the latches. Weighs in at just under 20lbs. Just some corner castors , foam and a couple of handles , it’ll be under 25lbs for a case this size. Pretty impressed Pennelcom Cases.

10/11/2019

Done for the night. This case is 39” x 19 1/2” x 11”. Mind you it doesn’t have the latches or handles in it , but as it sits now it’s under 20lbs ! So far this stuff is pretty good to work with. More to come !

09/11/2019

Going to school tonight ! Using this new super lightweight material from Penn-Elcom. 3/8 thick and so far pretty good to work with. A full sheet of regular 3/8” plywood weighs in around 35 lbs. this stuff is 13lbs !
An entirely different way of working but I think I can get use to it !

25/09/2019

FOR SALE
Approximate sizes between the foam is 11 “ x 16” x 16”. I’ll remove the slot on top and put in a label plate when it sells. ATA latch means it’ll fly securely. Solid build. Asking $200.

04/08/2019

Just finished a “ gift envelope “ case for my sons upcoming wedding. Felt good to be back in the shop today !

19/06/2019

Great slim case. 15” x 11” x 2” deep each side. 2 layers if 1” foam per side. Great for almost anything , tattoo machines, camera lenses , I’ll let you pick the handle and where it goes ! $150.

13/06/2019

Getting back into it slowly. Building a gift card case for my sons upcoming wedding !

28/12/2018

Time to get back into this game after almost a year off !

Address


Website

Alerts

Be the first to know and let us send you an email when Nedrob Custom Cases posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

  • Address
  • Alerts
  • Claim ownership or report listing

  • Want your business to be the top-listed Travel Agency?

Share