A P Frost Joinery & Renovations

  • Home
  • A P Frost Joinery & Renovations

A P Frost Joinery & Renovations I am a fully qualified, apprentice trained joiner up to NVQ Level 3, 17 year's experience. Also now doing wood&resin work too. Below are some aspects covered.

I am a fully qualified, apprentice trained joiner up to NVQ Level 3 available for all your joinery needs. I cover a wide aspect of joinery from Home Improvements, Refurbishment to new build. All work finished to high standards. Please feel free to get in touch for a free quote. If you don't see anything on the list feel free to ask still about any query. Works covered:

Timber Stud Walls
interna

l/External Door Frames
Window Boards
Stairs
Doors
Architraves
Skirting Boards
Stair/Hand Rails
Spindles/Balustrades
Laminate Flooring
Loft Hatches
Loft Boarding

External Works:
Joists
Timber Decking

Resin Works:
Table's
Coasters
Charcuterie Boards
(get in touch for any other idea's)

Managed to get this job ticked off yesterday after having car issue's. Some weeks just don't go to plan. Customer had a ...
08/03/2025

Managed to get this job ticked off yesterday after having car issue's. Some weeks just don't go to plan. Customer had a concept designed by Howdens to form a utility area and box around the boiler. Instead of being fully fitted though customer asked for panels to be removable to gain access to plumbing and boiler so that's exactly what I did and turned out well. Customer's are very happy with result and said it's exactly what they we're after which is what it's all about. Also fitted 3 sets of architrave while i was there too. Want to thank them both for their patience while the car issue's have been ongoing. Much appreciated 🙏👍🔨🪚

15/02/2025

Also had this vid aswell which again gives another good view 👌🔨🪚

Customer has sent me these pics of their living room now finished from media wall and alcove cupboards that i recently f...
15/02/2025

Customer has sent me these pics of their living room now finished from media wall and alcove cupboards that i recently finished. Looks lovely and props to Rich's Mrs Jen for decorating. Done a fantastic job of it. Thankyou again to Anthony England at A R E Electrical Services for sorting electrics. Looks well all lit up now 🔨🪚

Another job ticked off today. Customer wanted rid of their old fireplace and to turn it in to a media wall with alcove c...
07/02/2025

Another job ticked off today. Customer wanted rid of their old fireplace and to turn it in to a media wall with alcove cupboards. Then afterwards I removed the existing skirting and fitted their Herringbone effect laminate floor then refitted the existing skirting back on. Unit's and door's have been made from scratch as always. Just out of mdf because they wanted something they could paint. Also have a little alcove at the side of the shelving area to hide their Nintendo switch out of sight. Shelves have LED strip Lighting fitted again by the top man Anthony England at A R E Electrical Services. Not had chance to get pic's with them on yet but customer is going to send me some after it's decorated. Look forward to seeing the end result. Thankyou Rich and Jen for constant top ups of tea and biscuits 😁😂 🔨🪚

First completed job of the year. Full stairs renovation. Had to make all the cladding for it as they don't seem to offer...
25/01/2025

First completed job of the year. Full stairs renovation. Had to make all the cladding for it as they don't seem to offer pine cladding as standard so machined it all to size for the job and also made the newel caps. All ready to be oiled by the customer. All those awaiting me coming out to quote I will finally get out to you next week. Sorry for the delay. This job has been very time consuming and had to get it completed in a short time frame ready for carpet fitter coming. 🔨🪚

Hello everyone. Hope you all had a fantastic Xmas. Just want to thank all my customer's from this for the work you have ...
31/12/2024

Hello everyone. Hope you all had a fantastic Xmas. Just want to thank all my customer's from this for the work you have put my way. I really appreciate it I have loved a lot of the project's I've undertaken and been a year that's consisted mainly of some amazing bespoke built project's. Very proud of how they turned out. The 2 main large one's the Media unit and wardrobe required a lot of time and patience from not just myself but the customer aswell so a big thankyou to the Guest family and Birkby family for your patience. Sorry to those I haven't made it out to this year to quote etc. This year has thrown many a spanner in the work's, Job's taken far longer than expected but end results have been well worth it. Look forward to what project's may come in 2025. Happy New year everyone and all the best to you and your families 🙏👍🍻🎉🎊🎆🎇🔨🪚

28/11/2024

Nothing more satisfying as seeing an end product function as it should. With having butt hinges I went for magnetic catches and they don't half grab. Both hinges and catches we're from an iron mongers supplier. A lot higher quality than what you can get from local or mainstream diy shop's. As you can see aswell drawer's are on a soft close runner's. Very happy with how it's turned out. Took longer than expected but worth it for the end result and can't wait to see it with a finish on. 🔨🪚

Some better photo's of this bespoke built wardrobe I've recently finished in daylight and also built a platform at the s...
28/11/2024

Some better photo's of this bespoke built wardrobe I've recently finished in daylight and also built a platform at the side for a traditional style bath they're having fitted. Looks better now I've had a tidy up too 😂🔨🪚

From one bespoke Job to the next. Was asked by the customer to build a bespoke wardrobe because they wanted something so...
24/11/2024

From one bespoke Job to the next. Was asked by the customer to build a bespoke wardrobe because they wanted something solid that will last. They gave me a concept idea and I discussed everything with them and they went for the idea of bi-fold door's across the front to allow for a bit more room for getting access. They also opted for butt hinges, dado and cornice and beading inset in the door's to give it a more traditional look and finish. All cabinets, door's, drawer fronts and drawer's made from scratch using 18mm radiata pine boards and a 9mm Okoume plywood for the back's and door drawer panels to make them solid and rigid. Drawers are on soft close runner's and have an 18mm bottom panel to keep them solid and tonprevent sagging like you get with thin panel's. Seperation panels are 24mm radiata pine board's to give a better fix for the hinges. Definitely took longer than expected but I'm well happy with the results once again and enjoyed the process for the end result and as always big thankyou to customer for their patience and for giving me opportunity to build this for them and of course the brews on tap ☕️. Can't wait to see what finish they go for 🙂🔨🪚

Hello everyone. Apologies to those still awaiting quotes. It has been a very hectic few week's getting everything made a...
10/11/2024

Hello everyone. Apologies to those still awaiting quotes. It has been a very hectic few week's getting everything made and continuing with my current project aswell as working around family life due to my wife's shifts. Most day's I don't stop doing thing's until around 9pm. I am about to sit down now though and start working thing's out for everyone waiting. Here's a sneak peak to what I am on with though. 18 door's because some of the door's are going to be bi-fold's, 6 drawer fronts and 6 drawers all made from scratch. They're going to have a decorative mould inset aswell 🔨🪚

27/10/2024

Hello. Just a quick update on my schedule. Apologies to those awaiting quotes. I have been really busy. On with a bespoke hand built wardrobe at the moment and been on with cutting everything to make 18 door's and 6 drawer fronts and 6 drawers to make so been very time consuming. Almost there with it. As for availability at the moment I'll most likely not be available until towards the end of Nov early Dec next or if your wanting to get booked in for next year for anything then feel free to get in touch as this year and last I filled up very fast. I have a few in waiting who will get priority first but look forward to whatever future projects come my way.

Thankyou

Another bespoke build from scratch started this week. Keep your eye's open. Going to be another good one. Just have to w...
26/09/2024

Another bespoke build from scratch started this week. Keep your eye's open. Going to be another good one. Just have to wait on the delivery of the board's I'm using 🥷🔨🪚

Some more updated photo's here of the hallway and stairs where i built some understairs storage, picture frame panelling...
21/09/2024

Some more updated photo's here of the hallway and stairs where i built some understairs storage, picture frame panelling and victorian style Skirting and architrave with plinth block. Looks lovely all finished. 🔨🪚

Painting and decorating in the hallway and landing was done by Simon Massey. Highly recommend him.

Some more picture's from most recent job. Customer decided to go for 170mm Victorian style skirting and 80mm Victorian s...
18/09/2024

Some more picture's from most recent job. Customer decided to go for 170mm Victorian style skirting and 80mm Victorian style Architrave with a plinth block and i personally love how it looks to go with the theme of the rest of what I've done. A lot has been decorated since these pic's so I'll be getting some updated one's this week. 🔨🪚

Another part of all the bespoke work I've done whilst been at my current project is this Radiator cover. All bespoke mad...
17/09/2024

Another part of all the bespoke work I've done whilst been at my current project is this Radiator cover. All bespoke made to size, routered etc to match with traditional style they have gone for. Will get another picture once they've fully finished decorating. Also going to be making another one for them 🙂

Really enjoyed all bespoke work I've been given the chance to do. 🔨🪚

Address


Website

Alerts

Be the first to know and let us send you an email when A P Frost Joinery & Renovations posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to A P Frost Joinery & Renovations:

Videos

Also had this vid aswell which again gives another good view 👌🔨🪚

Nothing more satisfying as seeing an end product function as it should. With having butt hinges I went for magnetic catches and they don't half grab. Both hinges and catches we're from an iron mongers supplier. A lot higher quality than what you can get from local or mainstream diy shop's. As you can see aswell drawer's are on a soft close runner's. Very happy with how it's turned out. Took longer than expected but worth it for the end result and can't wait to see it with a finish on. 🔨🪚

Let there be light 💡✨️ Just want to say thankyou to all the likes, shares and amazing feedback I've had off of this project so far. Really appreciate it and makes what i do all the more worth while. I always take pride in all my work i do whether it's family, friend's or public and this one I'm extremely proud of how it turned out. A very labour intensive job from start to finish being fully bespoke built from scratch but 100% worth it for the end result. Electric's carried out by - A R E Electrical Services

Shortcuts

  • Address
  • Alerts
  • Contact The Business
  • Videos
  • Claim ownership or report listing

  • Want your business to be the top-listed Travel Agency?

Share