Kinetic Simulation

08/08/2024

A very proud moment for me this morning in Paris. We've been hunting a Gold Medal at the Olympics on one of our bikes since the Pista Evo 2 in London 2012.

The Pista Team, Pista Team Sprint and Pista Team Pursuit were launched in Rio 2016 with the Men's Sprint Team missing out on Gold by 0.1s in the Final. Cycling NZ raced them again in Tokyo 2020 and now in Paris 2024.

There have been a number of World Championships, Olympic medals, Commonwealth Games Gold medals for the bikes but never an Olympic Gold. The last Gold for NZ in the velodrome being in Athens in 2004.

Ellesse Andrews you have made us very proud rounding out the story of these bikes last night in the Women's Keirin with Gold on the Pista Team or as we called it Project Cambridge.

04/07/2024

An exciting new product that we designed for startup Sea Turner and launched at the Hutchwilco New Zealand Boat Show this year. Sea Turner is a revolutionary way to load and store dinghies on boats and vehicles. With a push of a button, your dinghy is lifted and loaded or deployed in less than a minute. When secured, Sea Turner keeps your dinghy compactly stowed upside down, preventing water and debris collecting and out of the way of everyday boating activities. Fully electric operation so no heavy and complex hydraulic systems like existing solutions. Check them out www.seaturner.com and get in touch with Kinetic Sim for all your product design needs!

19/06/2024

Congrats to our clients SBT Motorsport for taking out the North Island Endurance Series in the awesome McLaren 650S GT3!

25/05/2024

Congrats to SBT Motorsport on their win at the Taupo round of the NIERDC series. The aero package on point 🤩

25/05/2024

The wicked McLaren 650S which we upgraded the aero package on setting the pace down in Taupo 👍👍 Well done SBT Motorsport

26/03/2024

We've also been working on getting the Race Lab V8 engine design and mounting together. We've developed new gear covers and cam covers to hard mount the engine in the chassis.

26/03/2024

Heaps going on with the Race Lab E21 DTM/GT3 build. The centre body being prepared for moulds, front beams and suspension fabricated and 3d printed parts all being test assembled for checking.

25/12/2023

21/12/2023

When your clients start up amazing racecars at the Xmas BBQ 😍

10/12/2023

With the Christmas break quickly approaching and things starting to wind down we wanted to offer up our services over the holidays. We are working through and have resource to take on some projects if you really don't want to wait till late January to get some projects moving. Or even if you have a project on and need some extra support through the break. Everything from CAD design, product design, CFD simulation, general aero design and advice, FEA and structural design. Any project big or small! Send me an email [email protected] and we can get things done!

01/12/2023

An exciting project we have been working on developing a new aerodynamic package for a stunning BMW E46 M3. A couple of plots from the existing cars baseline analysis. This is going to be one rapid racecar when its all done!

04/11/2023

Good luck to the SBT Motorsport McLaren 650S GT3 at the Highlands 6 Hour. They are on pole for the big race with the Kinetic Simulation developed aerodynamic updates!

09/10/2023

Great to be involved with Vélos Advancements designing their stunning new road bike. We can't wait to see this bike come to life 😎 A collaboration process we have thoroughly enjoyed.

24/09/2023

All the ‘aero’ as they say. A few of our clients cars over the years. There is so much improvement to be gained by proper analysis and even more importantly designing to the rule book!

23/09/2023

A throwback to the Remraf Racing R35 GTR from the NZ Endurance Series 😍 Get in touch if you want to find some more speed from your racecar or are thinking about starting a new build! Email us at [email protected]

05/05/2023

Front end Friday brought to you by Race Lab

20/04/2023

We are forging ahead with the design of the Race Lab E21. The Dome Racing Team / 童夢 carbon chassis is nearly ready to ship from Japan and drawings/plugs for composite parts are being sent out for machining. Exciting times :)