KZN Resins - Pty Ltd Cape Town

19/06/2024

Good day all!!!!
We have some specials running at the moment.
Give us a call (021 556 9660), e-mail ([email protected]) or message us for more details.

28/05/2020

Good news!!!
KZN Resins can now assist you with hand sanitizer. Please contact our friendly staff and ask about our Stericol hand sanitizer as well as pack size information. Our contact details are as follows: Cape Town 087 057 5491. Please note we also have branches in Durban and JHB who can assist in this regard as well.

14/05/2020

As part of the Government opening up the economy at level 4, KZN Resins is back and ready to assist any of our level 4 compliant customers.

Feel free to contact our offices in Killarney Gardens where we will be happy to assist you with any of your fibreglass and coatings requirements.

17/03/2020

Important Information on Coronavirus 5G Kung Flu

20/02/2020

Be sure to keep a eye out for our snazzy new signage when driving past our premises in Killarney Gardens - for all your resin, fibreglass and coatings needs feel free to contact us or pop in for a visit. Telephone number 087 057 5491 / 021 556 9660. Address Unit 1 Killarney Park, Silverstone Road, Killarney Gardens, Cape Town. Hope to hear from you soon

23/10/2019

Please remember that we can supply you in 25kg kegs, 225kg drums or 1125kg pallecons. When moving to drums please note that we can supply you with the necessary drum trollies and ancillary equipment.

Please call our offices for further information (021) 556 9660

05/09/2019

Please think about us when doing your next fibreglass releasing of your moulds. Do not hesitate to contact us on 087 057 54 91

05/06/2019

If you are needing woven roving please note that we normally keep 450g and 600g standard in stock and can advise on how best to use these products in your application. Please don't hesitate to contact our sales team. (021) 556 9660

27/04/2019

31/01/2019

27/11/2018

It is that time of the year again where many of us enjoy a well deserved holiday during the December period. As usual KZN Resins will be having our annual leave during this time and are dates are as follows: 12 December last day for orders, 13 December last day for collection / delivery. Our opening date will be the 9th of January 2019.

We would like to thank all our customers for their support during the year - We appreciate every single one of you.

16/11/2018

NEW TO OUR RANGE -
Please feel free to ask our sales team about the new 13mm diameter 100mm wide teflon roller - for those hard to reach corners / places.
(021) 556 9660

07/08/2018

Besides polyester resins and gelcoats, don't forget that KZN Resins also supplies an extensive range of alkyds/coatings - some of which listed below (please contact our offices should you require data sheets or more information/pricing etc):
Alkyd Resins:

• B 020 Coconut Oil Alkyd

• B 040 Medium Oil Alkyd

• B 040 HV Medium Oil Alkyd High Viscosity

• B 070 Long Oil Alkyd High Viscosity

• B 150 Short Oil Alkyd 60%

• B 180 Short Oil Alkyd Quick Drying

• B 240 Styrenated Alkyd

16/07/2018

H13 GLAZE is a high performance, water-based cutting compound developed specifically for the composite market which removes P1000 or finer sanding marks from production gel coats, and is the perfect solution for restoring weathered or oxidized gel coat surfaces.
KEY BENEFITS:
HIGHLY ECONOMICAL- Due to its cutting ability very little product is needed compared to other leading brands.
HIGH QUALITY- Due to the composition of our product it stays wet leading to less heat build up, no die back and a haze free high gloss finish
CLEAN- Does not clog up wool bonnets and washes out easily
DIRECTIONS FOR USE
 Water paper your mould down to p1000.
 Wipe down and clean surface thoroughly.
 Apply 2 or 3 thin lines of compound to surface.
 Run buffing machine between 1800 and 2500 rpm.
 Always rest buffing machine with the bonnet facing up and cover with a cloth to prevent contaminants from getting onto the buffing pad.

Please contact our offices for further details

06/07/2018

A must for when you have to properly measure the correct catalyst in your mix. Please ask our sales staff regarding our range of dispenser/decanting bottles in various sizes including the 1L, 500ml and 250ml containers which measure out 50ml, 25ml and 10ml at a time respectively.
This bottle just makes life much easier when mixing.

12/12/2017

A big thank you to all our customers for your continued support throughout the past year. To all of you and your families we wish a safe holiday (if you are getting one) and look forward to seeing you again next year.

07/12/2017

Before tackling your next project feel free to contact us for the best advice on what products to use and if needed we will give you the tips and guidance needed to ensure that your end product is a success. Call our offices today (021) 556 9660

05/12/2017

At KZN Resins we don't just manufacture polyester resins - we also manufacture specialized alkyds and coatings products.
Some of our products include:
* Short Oil Alkyd
* Medium Oil Alkyd
* Long Oil Alkyd
* Styrenated Alkyd
* Hydroxy Acrylic
* Coconut Oil
and many more.....

For further details or datasheets please call our offices. (021) 556 9660