Taylor'd Welding and Fabrication

Taylor'd Welding and Fabrication Custom designed to your needs. Professional service at a competitive rate. Free quotes
(1)

With over 20 years experience as a boilermaker in both the workshop and on-site, I have successfully expanded my range of expertise in the welding industry. Taylor’d Welding and Fabrication prides on providing an outstanding mobile welding service, with an highly motivated welder to ensure a high level of capability. This allow me to provide customers with a wider range of commercial, residential

and domestic mobile welding services to not only meet, but exceed your expectations. Also, I understand the importance of working in a safe and tidy manner, respecting the customer’s premises. This is achieved by carrying out pre-work assessment of any dangers within the working area and correcting any possible hazards before work commences.

No job too small.Re-welded, adjusted and greased up the hinges on a pair of electric gates for a customer. All enquiries...
12/12/2017

No job too small.
Re-welded, adjusted and greased up the hinges on a pair of electric gates for a customer. All enquiries welcome.

Back in Townsville and back in business!Starting with a complete build of a mobile pizza trailer. I designed this to com...
18/11/2017

Back in Townsville and back in business!

Starting with a complete build of a mobile pizza trailer. I designed this to comply with council regulations, and carried out all the fitting of electricts, plumbing etc and organised registration. Ready to hit the streets! Any enquiries on custom builds welcome.

The beginning of a new and even bigger truck bed
22/07/2016

The beginning of a new and even bigger truck bed

Truck bed finished
22/07/2016

Truck bed finished

After a few months traveling, I'm been back in the workshop for a while. This time fabricating skip truck beds.
14/06/2016

After a few months traveling, I'm been back in the workshop for a while. This time fabricating skip truck beds.

Completed a short contract recently carrying out some work on a machine bucket ... Crack repairs & fittting wear plates ...
31/08/2015

Completed a short contract recently carrying out some work on a machine bucket ... Crack repairs & fittting wear plates inside and out. Mig welded with 3xp flux core wire and required a pre heat to 150℃, then 3 run fillets all round to create the required 18mm fillet welds.

Spending some time doing structural work in a workshop. Getting the chance to lay down some heavy welds. 8mm fillet on 1...
17/07/2015

Spending some time doing structural work in a workshop. Getting the chance to lay down some heavy welds. 8mm fillet on 150mm box with 20mm plates. Plus did some work on the new crane for the workshop. Its over 15m long, 100% pe*******on required on all welds, plus pass ultrasonic testing.

Another trailer customised for a mowing company. Platform for a push mower added,  coupling/ 'A' frame extended, cage ad...
26/03/2015

Another trailer customised for a mowing company. Platform for a push mower added, coupling/ 'A' frame extended, cage added, and designed to have a tool box mounted up top.

Floating step designed and made for a verandah
06/03/2015

Floating step designed and made for a verandah

Pretty simple this one, just had to fabricate and weld brackets to allow goal post extensions to slot in
06/03/2015

Pretty simple this one, just had to fabricate and weld brackets to allow goal post extensions to slot in

Repair work to Volkswagen floor pan started today
05/03/2015

Repair work to Volkswagen floor pan started today

Customised a trailer for a lawnmowing company. Folding platform and ramp conversion instaled for loading purposes
20/02/2015

Customised a trailer for a lawnmowing company.
Folding platform and ramp conversion instaled for loading purposes

Leveling/spreader bar made
18/01/2015

Leveling/spreader bar made

Steel skeleton for a shade wall, fabricated and assembled on site
10/01/2015

Steel skeleton for a shade wall, fabricated and assembled on site

Verandah built and designed by Taylor'd welding and fabrication
10/01/2015

Verandah built and designed by Taylor'd welding and fabrication

fabricated a rear bumper for a landcruiser
10/01/2015

fabricated a rear bumper for a landcruiser

campervan interior
10/01/2015

campervan interior

some restoration work on a 1955 VW kombi
10/01/2015

some restoration work on a 1955 VW kombi

work on a volkswagon beetle
10/01/2015

work on a volkswagon beetle

Address

Townsville, QLD
4814

Alerts

Be the first to know and let us send you an email when Taylor'd Welding and Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share