Modelix Racing

28/01/2025

📣The Würth Brake Cleaner is available at Modelix Racing📣

22/01/2025

We are pleased to announce that two-time former European champion Davide Tortorici, after a year using the Procircuit tires, will be running the Ultimate Engines in 2025. DT Racing

✴️ NOVITÀ ‼️✴️
INIZIA l'anno 2025 con MOTORI ULTIMATE .tortorici 🎉

22/01/2025

Check out the video of Robert Batlle explaining what he uses the Ultimate Racing Parts Cases for. Part .

Si te gusta el video, no olvides darle like 👍, suscribirte a mi canal 🔔 y dejar tus comentarios abajo. ¡Gracias por acompañarme en esta aventura! Nos vemos...

21/01/2025

💥ULTIMATE NEWS💥‼️ We are pleased to present you the new RSX8 Brushless Servo from Ultimate Racing, designed for 1/8 scale cars and with performance figures of 37 kg and 0.075 s. It meets all the durability, performance, and quality requirements needed for the highest level of competition. It can be used for both steering and throttle/brake.

A black anodized aluminum top case and a red anodized aluminum bottom cover give this servo a distinctive look. The 5 grooves on the top case and 7 grooves on the bottom cover provide efficient heat dissipation and help reduce weight.

In this servo, the O-ring seal has been repositioned inside the screws to prevent moisture from entering through them.

This servo does not require washers for assembly. The servo mounts have countersinks for using tapered screws, allowing for assembly without washers. It includes 4 M3x14mm tapered screws.

It comes with two flat rubber pads perfectly shaped for the servo to be mounted between the servo and the radio tray, acting as both a silent block and to prevent the bottom of the servo from touching the chassis. These rubber pads are much better than conventional ones because they reduce vibrations, prevent the servo from moving and do not deform when screws are tightened.

It includes an M3 cap head screw to mount the servo horn. This screw is ideal for the different servo horns from Ultimate Racing.

The servo packaging is an EVA box with the Ultimate Racing logo, which can be reused for other purposes.

Available the servo only and the servo with 4 different horns:

UR4701 ULTIMATE RSX8 1/8 37KG 0.075s. BRUSHLESS SERVO

UR4701-S ULTIMATE RSX8 1/8 37KG 0.075s. BRUSHLESS SERVO W/ UR1813-25 HORN

UR4701-S2 ULTIMATE RSX8 1/8 37KG 0.075s. BRUSHLESS SERVO W/ UR1811-25 HORN

UR4701-T ULTIMATE RSX8 1/8 37KG 0.075s. BRUSHLESS SERVO W/ UR1814-25 HORN

UR4701-T2 ULTIMATE RSX8 1/8 37KG 0.075s. BRUSHLESS SERVO W/ UR1815-25 HORN

More info and specs: https://modelixracing.com/en/614-servos-accessories

16/01/2025

Modelix Racing is pleased to announce that Robert Batlle will continue using the Nitrolux fuel and will also be running the Ultimate Racing Engines for the coming seasons! More news about our collaboration soon, stay tuned. Robert Batlle RC Driver 36mood

15/01/2025

Modelix Racing is pleased to announce that Tom Robin will be running the Procircuit tires, Nitrolux fuel and Ultimate Racing accessories for the coming seasons! Welcome to the Aigoin Racing Tom Robin

13/01/2025

💥ULTIMATE NEWS 💥‼️ The broken in Team Edition version of the new MXZ engine and its combo with 2142 one-piece pipe are already available.

10/01/2025

⚡️ULTIMATE NEWS⚡️‼️ Latest addition to the range of Ultimate batteries, the 3.7v. 3500mAh LiPo TRANSMITER BATTERY PACK. Part number UR4457. More info: https://modelixracing.com/en/batteries-accessories/1000804-bateria-ultimate-lipo-emisora-37v3500mah-conexion-jr-sanwa-mt5-mt44-m17.html

09/01/2025

💥ULTIMATE NEWS💥‼️ We are pleased to present you three more additions to the Ultimate Storage Solutions, the ultimate choice for racers looking for practical and organized solutions for storing the different size of odds and ends we all carry up and down. They are compact and lightweight, ideal for taking to the track. Must-have accessories for all radio control enthusiasts.

UR8841 ULTIMATE PARTS CASE 365x295x85mm
UR8842-M ULTIMATE DOUBLE-SIDED HARDWARE BOX 160x94x39mm
UR8842-S ULTIMATE DOUBLE-SIDED HARDWARE BOX 114x62x34mm

More Ultimate Storage Solutions coming soon... Stay tuned. More info: https://modelixracing.com/en/578-new-products.

20/12/2024

WLTOYS 124006 1/12 2.4GHZ 4WD RC CAR OFF-ROAD ROCK CRAWLER is already available at Modelix! This RTR is ideal for beginners that want to get started in the RC world at a very affordable price. It comes already assembled and ready to run. With 4 wheel drive, a powerful 540brushed motor, the four-wheel independent suspension with 4 hydraulic shock absorbers and the Li-Po battery provided giving awesome performance on any type of surface. More info https://modelixracing.com/en/cars/1000799-coche-electrico-rtr-112-rock-crawler-4wd-24-ghz-wltoys-124006.html.

14/12/2024

💥ULTIMATE NEWS💥‼️ We are excited to present you the Ultimate MXZ, a 3 Transfers Long Stroke .21 Engine. This engine is manufactured by the prestigious Japanese brand O.S. Engines, with the following characteristics:

COOLING HEAD
The MXZ is equipped with the same cooling head as its predecessors. This 8-fin cooling head has a very low center of gravity and has been designed to focus most of the airflow directly to the glow plug. By cooling the glow plug we get a more stable carburetion and idle.

CARBURETOR
Once again, the MXZ comes with the 21 J3 carburetor with the same modifications as the MXR engine. The high-speed needle holder was redesigned for a better refrigeration of the fuel flow into the carburetor.

CRANKSHAFT
The MXZ comes with a 14mm crankshaft with teardrop-shaped opening and paste in the inlet for improved flow.

BEARINGS
The MXZ comes with the original OS steel bearing in the rear and Ultimate Racing double sealed steel in the front.

VENTURI
The MXZ comes with the 6.5mm Ultimate Racing FLOWMAX venturi.

SLEEVE AND PISTON
The sleeve with 3 inlet port and an exhaust port guarantees a low fuel consumption with a very high but smooth and linear power.

Available the engine with the Airmax filter -MXZ or as a combo with the filter and the 2142 One-piece Ultimate pipe -MXZC3.

More info https://modelixracing.com/en/nitro-engines-accessories/1000798-motor-ultimate-mxz-filtro-airmax.html

10/12/2024

Great results from the Ultimate, Procircuit and Nitolux customers at The Fall Brawl. Thank you for trusting in our brands!

10/12/2024

We would like to congratulate the young Ashton Webb for winning all 3 sportsman classes at The Fall Brawl with Ultimate Racing engines and accessories, Procircuit tires and Nitrolux fuel. We would also like to congratulate Beach RC & Hobbies and his crew for the great event.

04/12/2024

📣Ultimate News!📣 Here you have the solution for using the same Ultimate Starter Box for both of your buggy and truggy, the ALUMINIUM UPPER DECK ADJUSTABLE POSTS BUGGY/TRUGGY (4 pcs). Part # UR4547.

26/11/2024

‼️MST - Max Speed Tecnology - is already available at Modelix Racing‼️ We are excited to announce that we have started distributing the super nice, fun and realistic RMX drift RTR cars with many different bodies and colors available. More info: https://modelixracing.com/en/1618-mst

19/11/2024

🎯NEW PROCIRCUIT COMPOUND🎯. After extensive development with our technical department and the Procircuit drivers, we are excited to introduce the new S compound. It’s more stable, versatile, and better suited to all conditions and varying levels of track grip. It provides a wide range of usability, offering excellent grip in soft compounds for slippery tracks, and great comfort and traction in hard compounds for high-grip tracks.
This new S compound is highly temperature-stable, allowing it to perform effectively with any compound regardless of ambient temperature. This enables us to base our choice of compound solely on the track’s grip at the moment, greatly simplifying the process of selecting the appropriate hardness.
Additionally, it offers greater durability and enhances the overall driving experience.
The S compounds are available as follows:
S1 (Supersoft, double white dot)
S2 (Soft, double yellow dot)
S3 (Medium, double orange dot)
S4 (Hard, double blue dot)

11/11/2024

🏆🏆AMS Alabama Manufacturer Shootout🏆🏆 Great weekend for the Modelix team drivers that attended the AMS this past weekend. We would like to congratulate Juan Carlos Canas for winning in Nitro-Buggy and TQing and wining in E-Buggy. Dakotak Phend for TQing and P2 in Nirto-Buggy and Nitro-Truggy and P4 in E-buggy. We would also like to congratulate Burak Kilic for finishing every Pro class on the podium and Seth VanDalen for his P4 in Nitro-Buggy. Awesome job guys!

Nitro-buggy
1. Juan Carlos Canas Carrasco – Ultimate/Nitrolux
2. Dakotah Phend (TQ) – Ultimate/Nitrolux
3. Mason Fuller
4. Seth VanDalen– Ultimate
5. Burak Kilic– Ultimate/Nitrolux

Nitro-Truggy
1. Ryan Maifield
2. Dakotah Phend (TQ) – Ultimate/Nitrolux
3. Spencer Rivkin
4. Burak Kilic– Ultimate/Nitrolux
5. Brandon Rose

E-buggy
1. Juan Carlos Canas Carrasco (TQ) – Ultimate
2. Burak Kilic – Ultimate
3. Spencer Rivkin
4. Dakotah Phend – Ultimate
5. Brandon Rose

06/11/2024

‼️RESTOCK OF PROCIRCUIT‼️ The container with tires, wheels and inserts has finally showed up.