Michell Instruments

15/10/2021

A correctly calibrated humidity instrument is essential to ensure that measurements are reliable – but there is a lot of confusion as to what ‘calibration’ actually is. Contrary to popular belief, it is NOT about adjusting an instrument to read correctly.

Read our latest article ‘What are the types of moisture calibration?’ to discover exactly what is meant by ‘calibration’, why it is so important and the different options that are available.

Moisture or dew point calibration is the process of comparing a measuring instrument against an authoritative reference to identify any bias or systematic error in the readings. The reference instrument in any humidity calibration should be between 4 and 10 times as accurate as the instrument under....

29/09/2021

The NPL defines dew point as: ‘The temperature at which dew, or condensation, forms as you cool a gas. Where the condensate is ice, this is known as the frost point.

Unlike other process variables such as temperature, pressure, and flow, moisture has two unique characteristics:

It is difficult to measure accurately since moisture is directly affected by temperature and pressure

Process moisture is often a contaminant and can severely damage processes, equipment and reduce product quality.

To find out more about the measurement of water dew point in industry, read the full article: https://bit.ly/3EDcAOh

Moisture is a common contaminant in thousands of industrial processes and water dew point is an essential parameter to ensure quality and safety. This article explains exactly what water dew point is.

08/09/2021

Ensuring good air quality in hospitals is key to reducing transmission of airborne diseases. For example:

Virus: rh levels play a role in the survival of viruses and other infectious agents. At a temperature of 21°C, influenza survival is at its lowest, with a mid-range of 40 %–60 %rh. Temperature and relative humidity (rh) will constantly interact to affect the survival of airborne viruses in aerosols.

Bacteria: Carbon monoxide (CO) increased the death rate of bacteria when the relative humidity (rh) was less than 25%, but it protected bacteria when the rh was greater than 90%. Temperatures above roughly 24°C appear to reduce bacterial survival in the air.

Read the full article to discover more about the options available to monitor these and other crucial air quality parameters. https://bit.ly/2YBj13U


Don't miss out - subscribe to PST newsletters https://bit.ly/3yNDBdP

19/08/2021

Glove boxes are used in thousands of applications where materials needed to be handled safely – and often they use an inert atmosphere. Because they have a relatively small size, maintaining the right conditions is relatively simple, although not without challenges. Read our latest article to discover the critical measurements and how best to make them. https://bit.ly/38aPujb
,

Glove boxes allow materials to be handled safely and are used in thousands of applications. Find out the variables that need to be controlled and how to measure them correctly.

06/08/2021

When calibrating humidity sensors, simply monitoring the readings of the sensors under test against the set point on the generator is not enough. These generators only use mixing techniques and they cannot produce a definite dew point. To correctly assess the performance of a humidity sensor, you need a reliable, fundamental reference measurement to use as a comparison.

Michell Instruments’ high-precision chilled mirror hygrometers measure a primary characteristic of moisture – the temperature at which condensation forms on a surface. This means that they are inherently repeatable and ideal for calibration laboratories looking to achieve low measurement uncertainties. Read more: https://bit.ly/3CmeFgd

Why not sign up to receive regular updates with our monthly industry newsletters? https://bit.ly/3CnuSSj

Having a reliable humidity standard ensures accurate calibrations. Chilled mirror hygrometers are highly accurate, even down to -100 °C frost point.

28/07/2021

For many industrial trace moisture measurements, dew-point transmitters are the ideal choice. They are low cost, easy to install and robust enough to withstand the tough environments. This includes measuring moisture at line pressure, operating at high ambient temperatures or in hazardous areas. They are mostly used in applications where measuring the water dew point in a gas is crucial to protect equipment or ensure the quality of products. To get the best accuracy from your dew-point transmitter you need to understand how the different types of transmitter work, and how each is suited to specific applications. We cover all this in our latest blog post: How accurate is your dew-point transmitter? Follow the link to find out more. https://bit.ly/3l1shHv

For many industrial trace moisture measurements, dew-point transmitters are the ideal choice. Learn how the different measurement technologies affect performance depending on application.

21/07/2021

As an inert gas, nitrogen is often used as a blanketing gas to shield highly reactive chemicals from contact with the air or oxygen. It’s also easy to produce nitrogen on-site, using (V)PSA nitrogen generators, close to the area of use to ensure a reliable, continuous supply.

But what are the safety considerations when you are setting up Nitrogen generation near to – or even within – a hazardous area? This is exactly the question we address in our new blog post: ‘Achieving pure nitrogen production on-site safely for hazardous areas’ – read more here. https://www.processsensing.com/en-us/blog/achieving-pure-nitrogen-production-on-site-safely-for-hazardous-areas.htm

generator

N2 is often used to blanket or shield highly reactive chemicals from contact with the air or oxygen. Producing N2 on-site is cost-effective and safe with the correct purity analyzers.

14/07/2021

Tunable diode laser spectroscopy (TDLAS) and metal oxide moisture sensors are both popular and effective measurement techniques for controlling moisture in natural gas. They each offer benefits and advantages over the other so choosing the most effective option for your process depends on exactly how you are intending to employ the moisture analyzer and the outcomes you want.

Read our guide to discover the different characteristics of each measurement technology and their relative strengths for specific applications within natural gas processing. https://bit.ly/3r0239l

12/07/2021

We have launched our latest flagship Chilled Mirror Hygrometer, the S8000 -100. The compact unit is designed for standards laboratories and as a reference for humidity calibrations. It gives reliable frost-point measurements down to -100 °C with no need for additional cooling.
Access the full technical specifications on https://bit.ly/3oMAv59: https://bit.ly/3qTJVOB

26/05/2021

When it comes to trace moisture measurements in natural gas or petrochemical processes, there are lots of options. There have been many new developments in sensing technologies over the years, and although new technologies have many advantages to offer users, older technologies still provide benefits for many applications.

Our latest blog post ‘six reasons to choose metal oxide moisture sensors for your process’ looks at the benefits that the humble dew-point transmitter offers to users.

At Process Sensing Technologies we manufacture analyzers using a range of different trace moisture sensing technologies. This means our sales engineers have a good understanding of what each technology can offer in different applications and – most importantly – can advise customers on the best fit for them. https://bit.ly/3fx6Aek

19/05/2021

Many process moisture applications rely on measurements of water dew-point temperature. Unlike moisture content – which is measured in parts per million – water dew-point in a gas is relationship between the moisture content, temperature and pressure.
Installing moisture sensors correctly is essential to ensure accurate measurements. Learn the best way to install dew point transmitters for extractive sampling and in-situ sampling. https://bit.ly/2PCjwXl

12/05/2021

Exploding the false assumptions about metal oxide moisture sensors. The manufacturing processes, materials and specifications of metal oxide moisture sensors have improved greatly since they were first introduced in the 1960s.

However, some engineers still believe many of the false assumptions about the technology. Although the original sensors had limitations, modern metal oxide moisture sensors offer real benefits to many applications. Despite this, many users are persuaded to invest in more costly and sometime less-effective moisture measurement technologies for their applications.

In this article, we examine some of the most common false assumptions about metal oxide moisture sensors and explain the facts. https://bit.ly/3t7817K

05/05/2021

Spot checks for natural gas quality just got easier. Portable chilled mirror measurement for both water and hydrocarbon dew point. Fully hazardous area certified, complies with ISO 6327/ASTM D1142 with HD video recording and data logging of all measurements. Find out more: https://bit.ly/32YxhCK

Introducing the Michell CDP301 portable water and hydrocarbon dew-point tester.Designed for use in natural gas processing, transmission pipeline checking and...

28/04/2021

Want to find out more about trace impurity detection and control for semiconductor manufacture? Our new industry page collects detailed information of the types of measurements needed for each application along with recommended instruments and analyzers. There is also a large collection of application notes which include insights into specific processes. https://bit.ly/3aagq3B

Analyzers, systems and portable instruments for critical quality and safety measurements in petrochemical processing and refineries.

21/04/2021

Electronic specialty gases (ESGs) are used throughout the electronics sector, but the largest users, with the most diverse needs are semiconductor manufacturers. Various ESGs are used in most semiconductor processes, such as film deposition, film etching, substrate doping, and chamber cleaning.

In our latest blog post, we give an overview of electronic specialty gases and then look in detail at three examples where gas chromatographs and accessories have been employed to ensure the quality of the high purity specialty gases used in semiconductor manufacture. Find out more here. https://bit.ly/2QvxUjZ

High purity electronic specialty gases (ESGs) are used throughout the electronics and semiconductor sector for film deposition, etching, substrate doping, and chamber cleaning. Discover how operators detect impurities down to parts per trillion.

24/03/2021

Relative humidity is a critical parameter in many industrial applications from power generation to pharmaceutical production. Most of the time a fast-responding polymer capacitive moisture sensor is going to be effective. But did you know that, in some circumstances, a chilled mirror hygrometer is going to give you better results. Read our latest blog post to find out why. https://bit.ly/2P2SxUv

26/02/2021

Over 70 million tonnes of hydrogen are produced each year and this is set to grow as demand across the world rises. Not only is hydrogen used widely in manufacturing and chemical industries, but its use as a fuel is also driving demand from the automotive and power generation sectors too.

However, handling this amount of hydrogen can be problematic. Not only is it highly flammable, its small molecular size makes preventing leaks especially challenging. The precision measurements provided by the trusted Process Sensing Technologies’ brands ensure safety through early leak detection and also help operators maintain high levels of gas purity.

To find out more : https://bit.ly/3kpSHAm

24/02/2021

Lifecycle Services 🛠️ – Did you know we offer a range of services to help you maintain the reliability, safety, and performance of your equipment from our trusted brands? Whatever your industry or location, we have a global network of service centers with skilled service engineers who are on hand to help you.

Some of our lifecycle services include:
• Transmitter exchange
• Maintenance agreements
• Serviceable parts for hazardous areas
• Field engineering services
• Rental Services

Find out more about these services here: https://bit.ly/3upfcKG

For instrument maintenance PST offer a life cycle service in which skilled engineers will maintain the reliability and performance of your equipment.

16/02/2021

Michell’s Optidew 401 chilled mirror hygrometer has proven itself to be a reliable and convenient reference hygrometer for humidity calibrations in Rotronic’s UKAS-accredited laboratory in Crawley, Sussex. The busy humidity and temperature calibration laboratory uses the Optidew 401 chilled mirror hygrometer as a reference instrument for a HygroGen humidity calibrator. The combination is used to calibrate a wide range of humidity probes, dataloggers and handheld instruments at ranges between 0 to +60 °C, 5 to 90 %rh. Discover the full range of Process Sensing Technologies’ humidity and temperature calibration services: https://bit.ly/3ahGAlE