Bespoke Steel Yorkshire Limited

  • Home
  • Bespoke Steel Yorkshire Limited

Bespoke Steel Yorkshire Limited Fabrication of unique stainless & mild steel products. Drawing upon many years of experience, it focuses on quality and individuality of the pieces produced.

Bespoke Steel Concepts is an independent company with high standards of craftsmanship that takes pride in all of its work. Bespoke Steel Concepts will measure, design and manufacture to your specific needs. Fabrications can be a copy of an existing installation for replication or repair. Alternately, we can design and make you a unique piece tailored to the needs of your home or business. The webs

ite contains images from projects already undertaken. Please feel free to contact us regarding your particular requirements. Pictures oon the website is very much out of date and will be updated when we find time.

27/10/2024
What a challenge this job was. The transformation even amazed me when I looked back at the before and after photos.
21/10/2024

What a challenge this job was. The transformation even amazed me when I looked back at the before and after photos.

This mornings deliver was done by Steve in Michael Barughs big rig…..
24/09/2024

This mornings deliver was done by Steve in Michael Barughs big rig…..

Latest structural steel fabricated and fitted on site locally, a crane on site made fitting all these beams much easier.
18/08/2024

Latest structural steel fabricated and fitted on site locally, a crane on site made fitting all these beams much easier.

Bench's bench’s bench’s!!!
11/08/2024

Bench's bench’s bench’s!!!

Structural steel ground floor and first floor fitted by the sea with a view, working with Paul Hobson.
11/08/2024

Structural steel ground floor and first floor fitted by the sea with a view, working with Paul Hobson.

The things I get asked to make, this is a Monkey hatch for an enclosure at a local college.
02/03/2024

The things I get asked to make, this is a Monkey hatch for an enclosure at a local college.

A Bespoke odd looking experimental design digger bracket which fits a Bomford flail head to a digger or a dipper arm ext...
02/03/2024

A Bespoke odd looking experimental design digger bracket which fits a Bomford flail head to a digger or a dipper arm extension on a digger to reach inside the very deep drains of Holderness.

The digger brackets are welded to connection plate which is multi drilled. This means the 12ton digger bracket with its multi drilled connection plate can be removed and swapped with a 20ton or 3CX digger bracket with the same multi drilled plate to fit the flail head with 6-12 bolts depending on digger or attachment.

Out with the old in with the new..The Airman generator has done well over 12 years service running my fabrication shop's...
02/03/2024

Out with the old in with the new..

The Airman generator has done well over 12 years service running my fabrication shop's 3 phase machines. Reliability is key to running my busy fabrication shop after a lot thinking over the last couple of years, I have made the jump and upgrade with a this replacement generator. All fitted and now running the my fabrication shop. 😀

Been a busy Friday fitting all the composit boards to all seven bench’s I built earlier in the month. Bench’s have been ...
15/12/2023

Been a busy Friday fitting all the composit boards to all seven bench’s I built earlier in the month. Bench’s have been powder coated Matt black with a tiled table top.

It’s been a busy year for workshop cat Mog from checking out  Michael Barugh Steel Stockholding Ltd steel delivery’s to ...
10/12/2023

It’s been a busy year for workshop cat Mog from checking out Michael Barugh Steel Stockholding Ltd steel delivery’s to sleeping when not chasing invisible objects round the yard.

Benches benches benches 7 in total coming to a bar in Hornsea very soon.
10/12/2023

Benches benches benches 7 in total coming to a bar in Hornsea very soon.

It’s been a busy summer, this had to be a quick turn around job on a Saturday morning.
19/11/2023

It’s been a busy summer, this had to be a quick turn around job on a Saturday morning.

It’s only taken 6 months from delivery for me to finish the install of Kemper fume extraction in the workshop. Six metre...
22/10/2023

It’s only taken 6 months from delivery for me to finish the install of Kemper fume extraction in the workshop.
Six metre reach from the fan with 180 degrees movement covering a large area of my workshop.
The workshop upgrades always come last… Abra-Weld

Normally I am asked to make things bigger, stronger or longer, this time was the exact opposite this dipper arm needed t...
16/09/2023

Normally I am asked to make things bigger, stronger or longer, this time was the exact opposite this dipper arm needed to be two meters shorter with the hitch bracket angle altered at the same time.

Yesterday I had to quickly get the old JCB brackets chopped off and Manitou bracket welded onto our grain pusher so the ...
24/08/2023

Yesterday I had to quickly get the old JCB brackets chopped off and Manitou bracket welded onto our grain pusher so the wheat fitted In the shed.

Cantilever gate fabrication so far with the rolled sections done on the section roller.
17/06/2023

Cantilever gate fabrication so far with the rolled sections done on the section roller.

17/06/2023

This week at last, I have been able to get my new section rollers out from the corner of my workshop, Rolling 40x60x2.5mm RHS for the top rails on a large cantilever gate I am fabricating.

Michael Barugh Steel Stockholding Ltd Carl has been busy cleaning his truck, looking very smart. My new quality control ...
08/06/2023

Michael Barugh Steel Stockholding Ltd Carl has been busy cleaning his truck, looking very smart. My new quality control expert Mog was busy inspecting the steel beams before unloading.

I wish we could use a crane on every job, it makes the lifting and steel er****on so much easier.
25/05/2023

I wish we could use a crane on every job, it makes the lifting and steel er****on so much easier.

26/04/2023

You can’t beat time on the stick welder. Stick welding is still my favourite welder. Stick welding (MMA) is where my welding journey stared at night classes @ Bishop Burton College in South Holderness school workshops back in 1997.

26/04/2023

A little bit of on site welding last week, filmed in slow motion.

At the backend of last year the cladding arrived and we started fitting, in December we removed the old external wall cu...
19/03/2023

At the backend of last year the cladding arrived and we started fitting, in December we removed the old external wall cut the sheets down and moved them to the new external wall opening up the new space.
Pictures also of a few machines moved into there new positions.
Since the photos more machines have been moved, extra light and plugs have been fitted and Kemper welding fume extraction is on order for next month.

1.9 ton of structural steel fabricated in my workshop and fitted on site over the last couple of weeks.All certified and...
19/03/2023

1.9 ton of structural steel fabricated in my workshop and fitted on site over the last couple of weeks.
All certified and compliant with UKCA (EXC2) 1090-2.

Ridge beams to follow.

Mr moo’s new sign boards, bringing in the customers.
02/03/2023

Mr moo’s new sign boards, bringing in the customers.

Address


Opening Hours

Monday 07:30 - 17:00
Tuesday 07:30 - 17:00
Wednesday 07:30 - 17:00
Thursday 07:30 - 17:00
Friday 07:30 - 17:00

Website

Alerts

Be the first to know and let us send you an email when Bespoke Steel Yorkshire Limited posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Bespoke Steel Yorkshire Limited:

Videos

Shortcuts

  • Address
  • Opening Hours
  • Alerts
  • Contact The Business
  • Videos
  • Claim ownership or report listing
  • Want your business to be the top-listed Travel Agency?

Share