What are the opening hours?

Monday 9am - 7pm Tuesday 9am - 7pm Wednesday 9am - 7pm Thursday 9am - 7pm Friday 9am - 7pm Saturday 9am - 7pm Sunday 9am - 7pm

Pumpsense Fluid Engineering Pvt Ltd

Name: Pumpsense Fluid Engineering Pvt Ltd
Address: 5/F, HASTINGS Court, TOWER A , 96, GARDEN REACH ROAD, KOKATA, Kolkata, 700023, IN
Telephone: +91 9830109422

Home
India
KOLKATA
Pumpsense Fluid Engineering Pvt Ltd

This is a CENTRIFUGAL PUMP Manufacturing Company. The company merged with WILO SE of Germany in 2005.

Pumpsense has been promoted by Himadri ( [email protected] & [email protected] ) and Nandita Sen with the support of their associates in the pump community. Pumpsense is based on the learning and experience accrued from establishing and running a successful pump manufacturing company, Allied Centrifugal Pumps Pvt Ltd, (ACP), since 1995. This company successfully developed split-

case, end suction and inline pumps for industrial, building services and marine applications. In addition, it offered design and development services to international pump companies for listed fire pumps, both split case and inline, and a range of large end suction pumps for the European market. In 2008, the company produced nearly a 1000 splitcase and end suction pumps and achieved a turnover of US$ 6.0 million with an outstanding bottom line. Himadri and Nandita Sen handed over the management of ACP to Mather+Platt (A WILO Group Company) in May 2009 in order to start PUMPSENSE, a company dedicated to creating innovative products & services for centrifugal pump users and manufacturers.

27/04/2024

PUMPSENSE FLUID are joining us at the FSIE Expo in August for the 7th edition of FSIE!
We warmly welcome them aboard and extend an invitation to all companies looking to showcase their innovations.
Secure your spot today and be part of the future of fire, safety and security!

27/04/2024

Pumpsense Annual Meet- PAM 2024- Looking back, Looking ahead

Pumpsense team met on 15th April, 2024 at the picturesque resort of Ibiza for their annual strategy session. This was the fourth edition of the annual event. This event gives us an opportunity to look back at the year that has gone by in order to learn from both our successes and also from the mistakes that we made during the year. Also, importantly, we plan for the year ahead and also discuss on the mid term strategies to meet our growth objectives. Each functional group makes a short presentation and this is followed by Q&A session.

Over the years we have found these deliberations to be useful in clarifying our thoughts, review our mistakes and give us a great team spirit. This year there were 16 presentations covering strategy, marketing, quality assurance, fire pump business, product development, projects etc.

15/07/2023

Pumpsense Fluid Engineering Pvt Ltd

17/06/2023

Hydraulic Institute Test Laboratory Approval for Pumpsense, a first for South & South-East Asia

It gives us great pleasure to announce that our pump test laboratory has now received approval of Hydraulic Institute, USA as a certified pump test laboratory for efficiency testing of pumps as per HI 40.6.

This approval has been received after an extensive audit by HI nominated audit agency and represents untiring preparatory efforts of our team for more than eighteen months.

At Pumpsense, we consider performance testing of pumps as a principal area of value addition, we not only verify contracted performance during the test but, very significantly, establish mechanical and hydraulic performance over the entire operating range. Performance test, therefore, gives us the assurance that the pump will perform as intended when installed in the field.

There is yet another reason for our eagerness to obtain this HI certification, one of our major efforts in the recent years has been to develop energy efficient pumps for urban water supply and air-conditioning applications. As a result, we have been constantly developing and testing new high efficiency split-case, end suction and other centrifugal pumps for these segments. The test laboratory status accredited by HI will help us to validate test data with confidence.

Finally, we wish to use this test laboratory for a variety of pump related research work such as cavitation studies, part flow recirculation behaviour. Impact of casing/impeller design variables on pump hydraulics and mechanical performance, condition monitoring study of pumps etc. We want our pump test facility to become a truly valuable laboratory for conducting these studies.

Hydraulic Institute press release:

PTLAP Approved Labs - Pumps.org

https://www.pumps.org/news/pumpsense-fluid-engineering-private-ltd-test-lab-facility-approved-through-hydraulic-institutes-pump-test-lab-approval-program

17/06/2023

Hydraulic Institute Test Laboratory Approval for Pumpsense, a first for South & South-East Asia

It gives us great pleasure to announce that our pump test laboratory has now received approval of Hydraulic Institute, USA as a certified pump test laboratory for efficiency testing of pumps as per HI 40.6.
This approval has been received after an extensive audit by HI nominated audit agency and represents untiring preparatory efforts of our team for more than eighteen months.
At Pumpsense, we consider performance testing of pumps as a principal area of value addition, we not only verify contracted performance during the test but, very significantly, establish mechanical and hydraulic performance over the entire operating range. Performance test, therefore, gives us the assurance that the pump will perform as intended when installed in the field.
There is yet another reason for our eagerness to obtain this HI certification, one of our major efforts in the recent years has been to develop energy efficient pumps for urban water supply and air-conditioning applications. As a result, we have been constantly developing and testing new high efficiency split-case, end suction and other centrifugal pumps for these segments. The test laboratory status accredited by HI will help us to validate test data with confidence.
Finally, we wish to use this test laboratory for a variety of pump related research work such as cavitation studies, part flow recirculation behaviour. Impact of casing/impeller design variables on pump hydraulics and mechanical performance, condition monitoring study of pumps etc. We want our pump test facility to become a truly valuable laboratory for conducting these studies.

Hydraulic Institute press release:

PTLAP Approved Labs - Pumps.org

https://www.pumps.org/news/pumpsense-fluid-engineering-private-ltd-test-lab-facility-approved-through-hydraulic-institutes-pump-test-lab-approval-program

10/06/2023

Hydraulic Institute is happy to announce that Pumpsense Fluid Engineering Pvt Ltd Facility has been approved through the HI Pump Test Lab Approval Program.

06/05/2023

We're proud to announce that Pumpsense has just completed a successful audit by one of the world's leading steel manufacturers. As a supplier of high-quality pumps, we understand the importance of maintaining strong partnerships with our clients, and we're thrilled to have received their stamp of approval. This audit evaluated our manufacturing processes, quality control systems, and environmental sustainability efforts, and we're pleased to report that we passed with flying colors. Thanks to our team's hard work and dedication, we're confident that our pumps will continue to meet the needs of our valued customers.

05/05/2023

Pumpsense just completed an audit by the Hydraulic Institute, and we're proud to report that we received high marks across the board. This prestigious industry organization rigorously evaluates companies like ours on everything from product quality to customer service, and we're thrilled to have earned their seal of approval. Thanks to our dedicated team and commitment to excellence, we're confident that our pumps will continue to meet the highest standards for years to come.

04/03/2023

Protecting our small planet from fire hazards- Pumpsense fire pump in Vietnam
Asa manufacturer of UL-listed and FM-approved fire pumps, we at Pumpsense, make our small contributions to protecting our tiny planet from fire hazards. The footprint of our highly reliable fire pump can be found all over the globe - from Chile, Peru, and Ecuador in South America to Vietnam, Taiwan, South Korea, and Australia in the Asia Pacific. We are constantly developing new pumps for fire protection- making them more reliable, more compact, and more energy efficient.
For more information about our pumps,please visit : https://lnkd.in/g-MrdFGZ

25/02/2023

EMF 400 - 384

Successfully delivered to Australian customers -
These mixed flow end suction pumps are sometimes termed "short & fat" somewhat derisively because they deliver large flows at relatively small heads. Designing them successfully is, however, not very simple and it requires the special skills of our designers to keep the shut-off head and power control, to obtain high efficiency, and to keep an unavoidable recirculation gone as far away from the operating zone as possible We are happy that EMF 400-384 meets all these requirements with splendid ease.

To know more about our pumps, please visit: https://lnkd.in/g-MrdFGZ

06/02/2023

4HF10 & 6HF12
Fire pumps must perform reliably under the most adverse conditions. We, therefore, subject all our fire pumps to rigorous Failure Mode and Effects Analysis (FMEA) during the design and prototype development phases. Shaft stresses and deflections over the entire operating range, rupture pressure of the casing, bearing life, and suction lift capabilities are all analyzed, tested, and documented.
Constantly developing new fire pumps to achieve the highest reliability with the lowest possible peak power and driver rating. Detailed CFD analysis and numerical testing is followed by extensive testing of the prototype. Successful design requires multiple design parameter optimization. The lowest non-overload peak power must be achieved along with 15 ft suction lift capability at 150% of rated flow.
Every UL-listed and FM-approved fire pump goes through stringent witness tests by these accreditation agencies. Tests include the establishment of peak power under non-cavitating conditions and tests to demonstrate 15 Ft suction lift capability while the pump runs at full speed at 150% of its rated flow. Additionally, a pressure integrity test is carried out at twice the maximum working pressure plus 75 psi.

To know more about our pumps, please visit: https://lnkd.in/gNtsMERr

21/01/2023

Earth, Water, Air & Fire - These are the four elements, ancient Greeks believed, everything was made up of. At Pumpsense, we are deeply involved in two of these elements - water and fire. We make pumps that transport pumps efficiently and also fight fire both on land and at sea.
We are concerned with other two elements too - to make energy efficient pumps to keep the air clean and protect our earth

We have made this short film to remind us always of our elemental commitment to water.

14/01/2023

VSP 32-160

Clearing sumps of chemicals, effluents, and other corrosive, erosive, and often toxic liquids require reliable vertical sump pumps engineered to perfection and built with materials to resist the corrosive/erosive effects of the effluents pumped.
VSP 32-160 represents yet another addition to the expanding range of VS4 sump pumps manufactured by Pumpsense.
This pump has been constructed in super duplex stainless steel material and will work in a process plant in Indonesia.
To know more about our pumps, please visit:
https://www.worldofpumps.com/products.html

07/01/2023

VSP 25-160

Clearing sumps of chemicals, effluents, and other corrosive, erosive, and often toxic liquids require reliable vertical sump pumps engineered to perfection and built with materials to resist the corrosive/erosive effects of the effluents pumped.
VSP 25-160 represents yet another addition to the expanding range of VS4 sump pumps manufactured by Pumpsense.
This pump has been constructed in super duplex stainless steel material and will work in a process plant in Indonesia.

To know more about our pumps, please visit:
https://www.worldofpumps.com/products.html

02/01/2023

May the wind of life always be at our backs and the waves gentle as we sail toward happiness and prosperity. Here’s hoping that 2023 be a great year for you!
Happy New Year!

23/12/2022

We wish our valued clients a Merry Christmas. We send you our warmest thanks and tidings of joy at Christmas as a token of our appreciation for allowing us to serve you.
Have a wonderful Christmas.

17/12/2022

14HS 20 & 16HS21 - A Tale of Two Pumps
Many of the pumps we develop acquire identities of their own over a period of time. Their "personalities" are defined not only by their appearances but also by the applications they serve, duties they cater to
and destinations they travel to. These pumps are also sometimes defined by the changes they go through over time.
14H520 is a relatively young entrant in our community of axially split case pumps. The pump has been designed for a duty of 2700 m3/hr at 63m while running at 1490 rpm
The pump achieves a very reputable peak efficiency of 87% and is one of the very few pumps available at 1500 rpm in the Industry for this duty range. The pump is already proving popular both in India and Australia.
16HS21, on the other hand, is a much venerated mature design which has seen many transformations during its long journey as a mid-sized Industrial pump for a rated duly of 2600 m3/hr, 36m at 980rpm
This pump in its many avatars serves as a fan pump in paper mills, spray pond pumps in sugar mills, cooling tower pumps in small captive power plants, and ballast pumps in ships.

Both are champions in their class!

To know more about our pumps, please visit : https://lnkd.in/g-MrdFGZ

17/12/2022

5HST16

Yet another addition to our expanding range of two-stage axially split case pumps. The performance of the pump during the prototype test has exceeded our expectations - the best-rated efficiency of 84.7% has been achieved by the pump for a rated duty of 308 m3/hr at 113 m head.
Two-stage high-head split case pumps at four-pole speed are becoming increasingly important for conveying potable water to distant settlements all over the world due to the increasing scarcity of potable water. Energy efficient pumps are important both for the reduction of cost for conveying water over large distances and also for reducing the carbon footprint that every pump leaves behind during its operation.

To know more about our pumps : https://lnkd.in/g-MrdFGZ

24/11/2022

VSP 32-200

Clearing sumps of chemicals, effluents, and other corrosive, erosive, and often toxic liquids require reliable vertical sump pumps engineered to perfection and built with materials to resist the corrosive/erosive effects of the effluents pumped.
VSP 32-200 represents yet another addition to the expanding range of VS4 sump pumps manufactured by Pumpsense.
This pump has been constructed in super duplex stainless steel material and will work in a process plant in Indonesia.

To know more about our pumps,please visit : https://lnkd.in/gNtsMERr

19/11/2022

8WHS21
Replacing an old pump in an existing installation often poses serious challenges to the pump users. Problem becomes more acute if an exact replacement of the pump cannot be found due to discontinuation of the range by the pump maker, obsolescence closure of the original pump company,etc. Under these circumstances, our Drop-in replacement solution comes as a major energy efficient and environment friendly solution to the pump users.Replacement pump 8WHS21 is a good illustration of this unique service. This pump replaces an existing Weir Uniglide pump in the UK with an energy efficient "Pumpsense" unit customized to match footprint and interface dimensions of existing Weir Pump.
Pumpsense offers a "drop in" replacement service to pump users all over the world.

Address

5/F, HASTINGS Court, TOWER A , 96, GARDEN REACH ROAD, KOKATA
Kolkata
700023

Opening Hours

Monday	9am - 7pm
Tuesday	9am - 7pm
Wednesday	9am - 7pm
Thursday	9am - 7pm
Friday	9am - 7pm
Saturday	9am - 7pm
Sunday	9am - 7pm

Telephone

+91 9830109422

Website

http://www.worldofpumps.com/

Alerts

Be the first to know and let us send you an email when Pumpsense Fluid Engineering Pvt Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Pumpsense Fluid Engineering Pvt Ltd:

Videos

Pumpsense

Pumpsense Fluid Engineering Pvt Ltd #centrifugalpump #qualitypump #pumpsense #manufacturing #sustainablemanufacturing

Earth, Water, Air & Fire - These are the four elements, ancient Greeks believed, everything was made up of. At Pumpsense, we are deeply involved in two of these elements - water and fire. We make pumps that transport pumps efficiently and also fight fire both on land and at sea. We are concerned with other two elements too - to make energy efficient pumps to keep the air clean and protect our earth We have made this short film to remind us always of our elemental commitment to water.

Shortcuts

Our Story

Pumpsense has been promoted by Himadri ( [email protected] ) and Nandita Sen with the support of their associates in the pump community. Pumpsense is based on the learning and experience accrued from establishing and running a successful pump manufacturing company, Allied Centrifugal Pumps Pvt Ltd, (ACP), since 1995. This company successfully developed split-case, end suction and inline pumps for industrial, building services and marine applications. In addition, it offered design and development services to international pump companies for listed fire pumps, both split case and inline, and a range of large end suction pumps for the European market. The company merged with WILO SE of Germany in 2005. In 2008, the company produced nearly a 1000 splitcase and end suction pumps and achieved a turnover of US$ 6.0 million with an outstanding bottom line. Himadri and Nandita Sen handed over the management of ACP to Mather+Platt (A WILO Group Company) in May 2009 in order to start PUMPSENSE, a company dedicated to creating innovative products & services for centrifugal pump users and manufacturers.