🎥 2024 Techne Recap!
A summary of a few moments that have marked this year at our company.
We sincerely thank our customers, partners and team for their trust and cooperation.
🌟 We wish everyone a prosperous and inspiring 2025!
We wish you and your families a Merry Christmas!
A special greeting from Team Techne.
#MerryChristmas #Techne
Check out this compact blow molding machine model! The E1-380 is ideal for small productions, in this video it is producing 1L jars of yoghurt!
For this project the machine has been configured with 2 technical optionals:
1 - Internal Neck Dome Trimmer
2 - Blow Pin motorized adjustment
Download the datasheet of this model to learn more about the production capacity!
👉 https://www.technepackaging.com/it/prodotti/per-dimensione/piccola/e-380/
🔬 LAB ANALYSIS | Layers Distribution Control
The analysis of the layer’s distribution in a COEX plastic container allows verifying their radial concentration at various points of the bottle and by each cavity, evaluating their possible deviation from the nominal values.
The reference percentage of each layer is dictated by specific customer’s needs, the desired performance of the packaging or the type of content.
The main objective of the test is to control the correct repeatability of the layer’s distribution, from the production of the first samples to the industrial phase and, therefore, to ensure the quality standards of the packaging.
#layersdistribution #coex #multilayer #quality #extrusion #blowmolding #packaging
🔬 LAB ANALYSIS | Thickness Control
Check out this video of an icepack thickness test conducted in our in-house laboratory!
Using the precise Magna Mike thickness calibrator, we can measure multiple points across the height, base, and neck of a container.
This data is invaluable for ensuring proper plastic distribution, enabling us to fine-tune specific parameters by directly adjusting the machine's parison control system.
#quality #laboratory #packaging #blowmolding #technepackaging #thicknesscontrol
Due to 40 years of experience, Techne has great know-how in designing and manufacturing Extrusion Heads, especially co-extrusion.
During these years, more than 400 Co-Extrusion Heads have been designed and produced, from COEX-3 to COEX-6.
The main advantage of choosing Techne Extrusion Heads is having a unique referent who takes the responsibility on the efficiency of both the machine and the extrusion head.
Comment below your experience in Co-Extrusion Heads!
#extrusion #heads #blowmolding #packaging #COEX #multilayer #plastic
🔍 FOCUS ON PACK | Ice pack
Look at the production of this 1L HDPE Monolayer container for Ice pack application.
In this case, the production capacity amounts to about
465b/h.
Discover more about this machine model:
https://www.technepackaging.com/en/products/by-size/small/e-545/
#blowmolding #icepack #hdpe #bottleproduction
🚧 WORK IN PROGRESS! 🚧
Watch the handling of this COEX-6 Extrusion Head, a standard assembly operation at Techne, but still quite impressive to see in action.
How does it seem to you? Comment below. 👇
#extrusion #heads #blowmolding
Techne, during its 40 years of experience, has produced more than 800 Extrusion Heads in monolayer configuration.
Having a unique referent who takes responsibility for the efficiency of both the machine and the extrusion head is the main advantage of choosing Techne Extrusion Heads.
💬 Comment below your experience in monolayer Extrusion Heads!
#extrusion #heads #blowing #packaging technology
🚀 Another E2-545 machine just completed!
In this video you can see the E2-545 Extrusion Blow Molding Machine model in double carriage configuration, 2+2 cavities.
This machine is specifically designed to produce 1L monolayer icepacks.
Comment below your opinion!
#blowmolding #extrusion #plastic #icepack
🔬 LAB ANALYSIS | Top Load (4° Test)
At Techne Lab, we simulate typical loading conditions of a milk bottle during filling, capping, and stacking for transport or storage.
This test allows to optimize the production process and adjust the bottle thickness by reducing the amount of plastic where it has no effect on vertical strength.
#TopLoad #QualityControl #PlasticPackaging
𝗣𝗶𝗹𝗹𝘀 𝗼𝗳 𝘁𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝘆 | 𝗦𝗲𝗽𝗮𝗿𝗮𝘁𝗲 𝗽𝗶𝗻𝗰𝗵𝗶𝗻𝗴 𝘂𝗻𝗶𝘁 & 𝗡𝗲𝗰𝗸 𝗰𝗮𝗹𝗶𝗯𝗿𝗮𝘁𝗼𝗿
To produce bottles with handles, the parison must first be subjected to a pre-blowing process that expands it into a shape suitable for molding. At this point, a 𝘀𝗲𝗽𝗮𝗿𝗮𝘁𝗲 𝗽𝗶𝗻𝗰𝗵𝗶𝗻𝗴 𝘂𝗻𝗶𝘁 welds the parison, allowing it to be blown using a timed pre-blow valve.
Once this step is completed, the 𝗻𝗲𝗰𝗸 𝗰𝗮𝗹𝗶𝗯𝗿𝗮𝘁𝗼𝗿 takes over, picking up the finished bottles. It cools them and makes sure the neck has an accurate diameter before placing them on the exit conveyor belt with the manipulator. The precise neck diameter is achieved by water-cooled brass push rods, which effectively remove heat from the neck area, preventing any deformation that might occur due to plastic shrinkage.
Comment below your opinion!
#technepack #blowmolding #packaging #packagingindustry #packaginginnovations #packagingsolutions #plasticpackaging #plasticsindustry #techneinsights #neckcalibrator #precision #quality #control
