New Era Performance LLC

376/th400 for a good customer of ours. We had done the th400 and done Holley a while back. After taking it out for the first time it ran low 9s but when we turned it up 20lbs it lost fuel pressure, so we came back and replaced his 3 year old pumps with new ones and it’s back making sure it’s got fuel pressure. Well 20lbs and we made 1100hp! Can’t complain on this car full weight all stock interior. Hopefully we see some 8s soon.

Daddy shark 🦈

2018 GMC in for flex fuel and dyno time! #neweraperformance #e85

2007 Silverado on the rollers getting dialed in! #neweraperformance

1000hp fox on @holleyperformance Ecu getting some dyno time last week before making some passes at the local 1/8! #neweraperformance #ripbelt #itsbeenfixed

Super clean boosted rcsb on the rollers. #neweraperformance

Whipple equipped Ls7 on pump getting some dyno time #neweraperformance

A-B off the trailer and another pb for our good friend @_mgfab happy to be part of this built. #neweraperformance

2004 Escalade back for more boost! 10lbs and 500+ wheel this is going to one fun to drive! #4l60mightleavethechat

Zl1 on the rollers late at night. Almost done for the day. We take one day off from work and now we have to work till 1am 😭😭

Boost weather baby! #neweraperformance

This one was a fun one to dial in. Something different sometimes doesn’t hurt. #neweraperformance

We will b accepting toys and blankets this week to give back to those who need it. If you have a tune or are stopping by the shop remember not everyone can celebrate Christmas. Thank you. 🙏

Another pb for our customer @ss4nana ! Car makes about 700hp it’s on a stock trans and she drove it a-b with 0 issues. 9.81@138! Solid 6th gen built and tuned by us. #neweraperformance

@d1_ssclone86 and @_mgfab man idk what to say this guys from a customer to a good friend who’s been with us since day 1! New PB and some wild passes today. We will let him share his results but here’s a video I got! #neweraperformance #sneakpeak

6.0/4l80 with a @holleyperformance terminator to control it all! Last one for the day and I think I’m needing me one of these! Always fun to be on the rollers with something different. #neweraftw

Checking vitals on this car before @the_red_list_group everything looks good owner still needs to see a doctor but that’s not my specialty 🤷🏻‍♂️. #9secdaily

Next up the devil itself. This guy came to me a long time ago telling me to tune his truck it has racestars and some cute little blower, so I did then we went racing he came and I told him he needed real wheels well about two years later somehow @cmr_performance_ @d1_ssclone86 and me end up being good friends and his truck goes from a little fish to a shark wtf I mean who pissed him off. This truck is just nasty it shakes the floor just on idle. But let me tell you he’s been going at it last week to get it ready for the dyno and last night @_mgfab and @cmr_performance_ spent hours trying to get it all dialed in we went till 2am I say we but I was under the heater because it was cold af! But it all paid off the truck starts and idles now with that @fueltechusa 600 but this is the first truck I turn down for a 2am dyno it’s loud it’s wild there’s a devil inside. So to b continued but @ajdean955 you are wild my friend and dedicated! #fueltech #f2 #deanracing #mgfab

Another one that’s came along way a few year back @_mgfab wanted a 1000hp truck and honestly I don’t think it ever made 1000 but he wanted 9s and that definitely happened since then this truck you can’t even recognize it! From a customer to a good friend and now that he owns his shop a great business to work with @_mgfab does all my customers wiring and fab work along with a lot of work done to my car and truck, he just like Robert put it numerous hours of work to get this new set up going and again it paid off!!! Marco can get around Holley pretty good. So once again he set this thing up he got it where it got on the dyno under its own power and then he said here and don’t telll me how much timing you throw at it. Well that no fun I like to scare my people but we didn’t (kinda) he let me do the scary part 8000+ rpm on the rollers are definitely fun but he built himself a dam little monster! This one’s wild this one’s bad ass this one’s another single can that I want to see go down! Huge congrats to my little team becuse they are always there for me and I’ll always be there for them! Late nights pay off long hours on the dyno because @_mgfab said everything was fine when it wasn’t 😂 but final pulls like this make it all worth it! #anotherone #holley #turbo #meth #huges #copypaste #neweraperformance #mgfab #cmr

Flex fuel and dyno time for this 2016 Silverado! #neweraperformance