HIllbilly FPV

01/20/2020

This is a never used flying lemon diversity module for the fatsharks. I never used it since I ended up using the furious fpv module that came with my goggles so I have no idea how good they are but I will take 50.00 shipped in USA.

01/18/2020

Used very little. Has the latest version of opentx. I got it to use for a Jumper multi protocol module that comes with it. No battery still in the original box. 90.00 shipped in usa.

01/17/2020

Catalist Machine Works 6inch Merca great cruising quad. Ready to bind. Set up for 1800 mAh 4s batteries. Over 400.00 in parts originally will take 200.00 shipped in usa.

FC---Brain FPV 30x30 radix.
PDB---Brain FPV
ESC---Spedix GS 35 amp Blheli_32 4 in 1
RX---Frsky r-xsr
Cam---Runcam mini swift
Motors---T-motor F60 2200 kv
VTX---TBS Unify
VTX antenna---AXII right hand polorized.

01/17/2020

New and used racing frame lot..11 total. Some with spare arm sets. All for 85.00.

01/17/2020

Used motor lot. 150.00 shipped...Tmotors are all in good usable condition. The purple sumax have one usable set of 4 and two for spare parts. The red sumax have one good set of 4 with 35 amp blheli 32 bidirectional ready ESC's hardly used practically new and have a set of 4 with wore out bearings for spare bells and shafts. All sumax motors have screws to hold the shafts. 4-Brotherhobby tornado motors barely used in great working order and sunrise 35 amp ESC's. Good motors for a begining builders and pilots. Sizes and kv's can be seen in pics.

01/16/2020

Hglrc Batman 210mm stretched X race quad or free style for the 6s lovers. This one comes with a second complete frame for spare parts. Over 300.00 in parts for 180.00. I built this and flew it 3 or 4 times and it's been sitting ever since. NEVER RACED!! Brand new!!

FC---Helio Spring IMU-F AIO 32 khz loaded with that sweet butterflight. Or can be reflashed to Betaflight.
ESC---Hglrc dinoshot 60 amp 32 bit
It is 4.1 bidirectional dshot ready.
Motors--- Rcinpower 2306 1800kv powerhouses.
Camera---runcam micro sparrow
Vtx antenna---new style Luminier axii 2 left hand polorized.

01/16/2020

Armattan Camelion 120.00 bucks
PDB---Luminier
FC---Luminier lux f3
ESC's--- DYS xs 30 amp blheli s 4s max voltage.
VTX---standard old style 200 to 800mw.
Motors--- Sunny Sky Racing 2205 2500 kv
Camera not shown but is a runcam swift large style.

01/15/2020

I built this flew two or three times and left it setting so parts are used but barely, and never "raced".. Very light smooth and controllable flight characteristics... 200.00 dollars worth of parts selling for 90.00 dollars shipped. I also have the included antenna led not pictured

FC---Exuv 20X20 AIO Ill post a PDF for this in the comments.
Motors--DYS brand new good solid motors.
Camera---run cam micro swift
RX Fr-sky R-XSR
Frame---MRM 5mm arms

01/15/2020

Selling some stuff laying around. It's a lot of stuff several picks to look at. Leave a comment if you have questions. Contact me I messenger if you see something you want. I'm making deals so if you see something your interested in it will probably be affordable. Package deals are best.

12/15/2019

Lil bruder!!

12/15/2019

For those that have asked,
Yeap!
I finally got this 8s beast in the air today.. Maiden went well for about 5min. That's all 2 5000 mah. batteries would give. Motors never thought about getting hot. I didn't FPV test it yet, but did get a feel for the handling. Sounds like something amazing. You just have to see and hear to know what the heck it is.

11/22/2019

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-list SUPPORT ME ON PATREON at: http...

11/02/2019

I wouldnt get one of these if I did not have one already, but if you do the is great if you need spare parts for one you have already.
https://pyrodrone.com/collections/micro-drones-accessories/products/inductrix-fpv-bl-bnf-basic-blh8850

10/19/2019

Everyone is going to want one of these. This thing flies like a dream on 2s and will probably rip on 3s or 4s.

07/12/2019

This is still in the sizing phase..lol

https://www.thingiverse.com/thing:3743355

I borrowed this design and it made a great mount for my Source x xclass frame from TBS

07/05/2019

X class may not be for everyone...

https://www.nextfpv.com.au/collections/bundle-deals/products/x-class-12s-premium-power-bundle?fbclid=IwAR2oZenbRnYznonGD6ZI3Jyd1-SyR0rg096xdELFUPiCvK_2oQfNh0rx3cg

07/05/2019

Does anyone know of another 3d printer site besides thingiverse that has parts for popular frame designs?

07/03/2019

20% discount on your entire cart sitewide sale..........https://www.masterairscrew.com/?fbclid=IwAR17ZqW5dbtZk_q-ixXjT9hGuldL33Tz_f23KF68kGZXyychdcAYc1twtZo

Quality UAV Drone and Model Aircraft Propellers designed and manufactured in the USA since 1978. Extensive range of R/C propellers for racing, DIY models, professional and consumer drone upgrades for DJI, 3DR and GoPro UAVs.