Cutters Edge

Cutters Edge Blade Sharpening in Clifton, New Jersey We also offer the sales of top name-brand cutlery and knives, including Friedr.Dick® and Buck®knives..

Located in Clifton, New Jersey, Cutters Edge specializes in offering blade sharpening services for all types of equipment. Whether you are in need of knife sharpening for your hunting knives or replacement blades for your saw, or if you're interested in purchasing new cutlery, visit Cutters Edge and receive the best in quality and service.

05/02/2024

Did you know that it was France who first introduced the knife to the kitchen table? The knife, previously used as a tool in hunting or as a weapon in combat, now saw its place among other familiar cutlery, such as spoons.

04/30/2024

When machines are out of balance, it is possible for the cutting tools to wear unevenly, thereby delivering a rough or poorly finished product. When this is detected, have the cutting tools sharpened and balanced or tighten the machines before restarting operations.

04/25/2024

Saws have been around a long time. Some of the first on record were produced in Egypt over 4,500 years ago. Care to guess what these early saws were made of? If you guessed copper, you're right.

04/23/2024

Carrying a knife for sport or protection requires preparation and some caution. There are numerous ways to sheath and carry a knife safely and efficiently. They include: ankle holsters, shoulder harnesses, pocket carry techniques, and even neck knife pendant rigs.

04/18/2024

Because PCD (polycrystalline diamond) blades are so strong and durable, it takes special equipment to properly sharpen them. Because the PCD wears traditional diamond blades, erosion methods are more effective than grinding.

04/16/2024

Have your drill bits lost their bite? We can help. Our tool sharpening services will not only sharpen drill bits, but for some types of bits we can refurbish the ends. The result? Like-new drill bits for a very affordable price.

04/11/2024

For kitchen knives, you can determine whether they are sharp or dull by how they perform with daily tasks. For instance, the knife should be able to cut vegetables cleanly with almost no downward pressure. If you have to work at it, most likely the knife is dull.

04/09/2024

It’s important to remember that tool sharpening isn’t just for knives and saws. We’re always happy to help you evaluate the tools you use regularly to determine how often they need professional sharpening.

04/04/2024

We understand that the serious outdoorsman often relies on a trusty hunting or all-purpose knife for their survival during their adventures. If your knife isn’t meeting your demands, having it sharpened could help.

04/02/2024

Among the many advantages of advanced cermets blades is the fact that once they’re sharpened, they hold their edge much longer than a traditional carbide blade. This increases runtime, reduces downtime, and reduces sharpening frequency.

03/28/2024

In tooling applications, dull or improperly maintained cutting tools can cost you money. The quality of their work deteriorates, more post-cut grinding is needed, and more parts are out of spec. Keep them sharp and on the cutting edge.

03/26/2024

Every year in California, there is an International Saw Music Festival, and a "saw-off" competition is held. There are other saw music festivals held throughout the world.

03/21/2024

Even cutting on wooden or nylon surfaces will eventually dull a blade. Part of the problem though is that it happens gradually and is hard to notice. If you can no longer cut soft fruits and vegetables without damaging them, it is time to sharpen.

03/19/2024

Unless you are an expert at sharpening the twists and turns of bits, blades, routers, and grinders, you lose time and money. In addition, you are probably not doing the job correctly and ruining your equipment.

03/14/2024

Knife blades are sharpened by grinding the blade against a rough and hard surface or even a flexible surface with rough particles. Once the blade is sharp, the edge can be polished and straightened with a leather strap called a strop.

03/12/2024

Saw history: "Woodworkers used large saws to cut wood into planks, boards, and veneers," the Colonial Williamsburg Foundation writes. "Smaller saws were used to cut boards into parts, to cut joints, and to make decorative piercings."

03/07/2024

Care to guess which part of a quality cutting knife is the "bolster"? It's actually the thickened shoulder section just before the handle begins. The presence of a bolster is a key feature in forged steel knives. It is not typically present in lower quality "stamped" steel knives.

03/05/2024

Don't wait too long to have your blades sharpened! If you do, you run the risk of an expensive blade replacement. Having your saw blade (or blades) professionally sharpened will lessen the force required to make routine cuts and also allow you to finish projects faster.

Address

345 Lakeview Avenue
Clifton, NJ
07011

Opening Hours

Monday 8:30am - 6pm
Tuesday 8:30am - 6pm
Wednesday 8:30am - 6pm
Thursday 8:30am - 6pm
Friday 8:30am - 6pm
Saturday 8:30am - 1pm

Telephone

+19737726887

Website

Alerts

Be the first to know and let us send you an email when Cutters Edge posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Cutters Edge:

Shortcuts

Share