Pleasant Street Machinery

Pleasant Street Machinery We have the largest selection of used woodworking equipment in the Midwest. You can find us at Pleas

We specialize in solid wood processing machines and have a 20,000 square foot warehouse full of used machines ready to purchase. I have 40 years of experience as a woodworker and 25 years as a used equipment dealer and appraiser. I can help you choose the right woodworking equipment for your shop and assist you in arranging freight transport if needed to anywhere in the US.

This is a large Raku kiln by Olympic that looks to have never really been used. There is a bit of wear on the bottom pla...
05/09/2024

This is a large Raku kiln by Olympic that looks to have never really been used. There is a bit of wear on the bottom plate from having the furniture in it while moving the unit. Can be run off of propane or natural gas. The Pyrometer is included but not pictured. Unit is on wheels as well. Message us if you’re interested…………………………………………………………..

This very clean Clausing vertical mill came out of a local school. There is very little play in the screws. Both the coa...
05/07/2024

This very clean Clausing vertical mill came out of a local school. There is very little play in the screws. Both the coarse and fine vertical feed work properly. We are selling this with the vise and an XY rotary table is also available. It is currently 3ph……………………………………………………………….

Not something you see everyday in this condition.
04/24/2024

Not something you see everyday in this condition.

Disa 15hp, 3ph dust collection system, available very soon. Ductwork not included but we have a large quantity available...
05/17/2023

Disa 15hp, 3ph dust collection system, available very soon. Ductwork not included but we have a large quantity available.

$9000.00

06/29/2022

That’s how you get it done….

06/24/2022

Don’t see these much in this condition anymore….

06/20/2022

If it fits it ships lol….

06/14/2022

Test run for a customer……….

05/02/2022

For those of you who’ve seen our loading ramp. All I can say is “It’s about damned time”!!..

This is the only piece we were able to snag off the lathe before they scraped it unfortunately. Our thanks to  for the t...
04/25/2022

This is the only piece we were able to snag off the lathe before they scraped it unfortunately. Our thanks to for the tip 😎…

04/25/2022

Got a tip from on a few pieces that had just arrived there so we went over and took a peek. We we’re only able to snag one piece before they hauled it off. As sad as it is to see these machines wind up here it’s always cool as hell to watch them move machines this size…..

Anatolian shepherds pups available now. Three months old, unregistered. DM for more information…
04/19/2022

Anatolian shepherds pups available now. Three months old, unregistered. DM for more information…

04/18/2022

It’s about damned time…

04/18/2022

Better then original….

03/30/2022

Boring but necessary, the art of balancing wheels…

03/30/2022

Taking a very heavy Tannewitz wheel off the lathe with my new hoist…

03/07/2022

Small load headed to in Chicago last week. Special thanks to Heinrich trucking for their help in moving them…. -

~~~~~SOLD~~~~Arco Electric CNC5 rotary phase converter for sale. 5 kvaBeautiful condition$1500
02/15/2022

~~~~~SOLD~~~~

Arco Electric CNC5 rotary phase converter for sale.

5 kva

Beautiful condition

$1500

~~~PENDING~~~Powematic 180 planner just in. Comes with a Byrd head and Wixey remote digital readout. 5hp and 3ph. DM for...
02/15/2022

~~~PENDING~~~

Powematic 180 planner just in. Comes with a Byrd head and Wixey remote digital readout. 5hp and 3ph. DM for price….

~~~PENDING~~~Powermatic 180 planner with Byrd head just in and ready for sale. It's 5hp and 3ph and comes with a Wixey r...
02/15/2022

~~~PENDING~~~

Powermatic 180 planner with Byrd head just in and ready for sale. It's 5hp and 3ph and comes with a Wixey remote digital readout. Dust hood not pictured but is included.

$4500

01/04/2022

Sometimes the right tool for the job makes short work….

12/22/2021

And that’s how it’s done. Our thanks to Mike at again for moving this piece to its new home. We only had this Taylor clamp carrier for less then two weeks before she sold….

12/13/2021

Not woodworking but still a neat machine that fell into our recently….Works great and very clean, single phase to boot…DM us for price….

Wulftec SML-277 Stretch wrap machine, 5000lb load weight, 120 V, 1 ph & 60 Hz 15 A. Has a 77" diameter turntableBuilt fo...
12/13/2021

Wulftec SML-277 Stretch wrap machine, 5000lb load weight, 120 V, 1 ph & 60 Hz 15 A.

Has a 77" diameter turntable

Built for large pallet loads

20" NO-THREAD powered pre-stretch carriage for quick, easy and safe film loading

Very nice looking machine that wasn't used much before being stored. Works great.

We can freight this but due to size this will be on the pricey side due to floor space. If your within 3 hours of DeKalb Il we can recommend someone local who can feight this with no problem.

Machine weight 2800lb

This literally fell into our lap last week. It’s a Taylor CM12 clamp carrier. We debated keeping it but decided it needs...
12/06/2021

This literally fell into our lap last week. It’s a Taylor CM12 clamp carrier. We debated keeping it but decided it needs a home where it will be put to more use..DM us for info and price…

Address

240 10th Street
Dekalb, IL
60115

Alerts

Be the first to know and let us send you an email when Pleasant Street Machinery posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Pleasant Street Machinery:

Videos

Share