Pumpcoat

03/14/2019

https://pumpcoat.wordpress.com/2019/03/14/pharmaceutical-warehouse-floor-2-years-later-and-still-going-strong/

In the world of coatings, its not always good enough to worry about the here and now. Many products can look great after you apply them. The real test is how they stand up after months and years of…

04/27/2018

Custom built containments for your chemical needs; read how we can help:

https://wordpress.com/post/pumpcoat.wordpress.com/314

10/24/2017

08/24/2017

The following are images of a recent recently completed service. Shown below: before, during, and after the replacement of an epoxy floor, in a control room of a power plant.

07/28/2017

https://pumpcoat.wordpress.com/2017/07/28/scarifying-grinding-and-mastic-removal-floor-prep-for-construction-by-pumpcoat/

Proper Floor preparation is critical in getting the job done successfully. Pumpcoat has assisted construction companies and other customers with this process that often gets overlooked or rushed th…

06/29/2017

Getting outside at the Power Plants to do maintenance work. Caulking cracks and waterproofing tank bases for one of our customers:
https://pumpcoat.wordpress.com/2017/06/26/pumpcoat-does-repairs-coating-for-fuel-oil-tank-foundations/

One of Pumpcoat/PCI Contractor’s Gas Turbine Power Generation customers have some ageing Concrete Tanks with moats (gravel based containments) that house fuel oil, and were showing a lot of crackin…

11/15/2016

https://pumpcoat.wordpress.com/2016/11/15/cost-effective-solution-for-concrete-floor-crack-repair/

Cracks in concrete floors, drives or parking lots are a common problem for building owners or property managers. Either constant use from heavy machinery, or the freezing and thawing cycle in the …

05/18/2016

Happy Wednesday! How are your pump bases looking? If worse for the wear, we offer a cost-saving alternative to replacement: epoxy refurbishment: https://pumpcoat.wordpress.com/2016/05/18/refurbishing-pump-motor-bases/

A Power Plant customer had several pump & motor bases that had extreme corrosion due to the aggressive salt water environment they were in. Many of their pumps & motors were older units, an…

05/04/2016

Some of our Workers trained at a workshop this week to learn to do fancy decorative coatings. Adding new skills to our services.
Elitecrete Decorative coatings:

04/29/2016

Keeping our customers happy - Extending our services by utilizing other like minded companies with complementary skills, that's using our Vendornet https://pumpcoat.wordpress.com/2016/04/29/pumpcoats-vendornet-in-action-blasting-and-coating-large-floors-are-a-breeze/

Pumpcoat~ PCI Contractors has been in business for 17 years, providing high quality service to customers in power generation, industrial, commercial, property maintenance and other industries. Alon…

03/09/2016

The weather is getting warmer, time to take stock in what needs fixing after the winter weather. Leaks? Rust or corrosion? Cracks in your floors or concrete? Call Pumpcoat to help bring you up to spec, or get you the products for D-I-Y.

03/07/2016

Can we fix it? Not just Bob-the-builder can fix things - Pumpcoat - PCI Contractors can too! We have the know-how to rebuild concrete and other substrates, add an epoxy top-coat to prevent against future corrosion or for waterproofing. Non-skid flooring too and other safety upgrades too!

03/03/2016

Working on updating our annual vendor qualifications & safety forms for a few of our customers today. We have an excellent safety record here at Pumpcoat, and always take the safety of our workers and customers' people very seriously when out on a job.

02/17/2016

We quoted a large project for a regional Power plant this week - Discharge Flume repair & Canal Coating. We did a similar job a few years ago - Technically difficult project, but we nailed it!
http://www.pumpcoat.com/blasted-coated-intake-canal-power-generation-plant.html

Pumpcoat was contracted to blast and coat an intake canal at a power generation plant.

01/26/2016

Quotation went out for a large Boiler Feed Pump overhaul today to a New England Recycling plant. We can do the large stuff too! Westinghouse circ pumps,Fairbanks Morse, Large vertical types, BFP, Even large parts that need to be brought back to OEM specs.
https://pumpcoat.wordpress.com/2014/05/01/repair-of-a-large-fairbanks-morse-pump-for-municipal-water-authority/

01/14/2016

Back to basics - we have a lot of offerings for Facilities that have aggressive environments - Pumps for slurries, acids & chemicals, hardened parts for fly-ash or similar harsh service, epoxy coatings for preventative maintenance (like chemical containments) or rebuild from corrosion/erosion damage.

http://www.pumpshop.net/pictures/Pumpcoat-case-history-30-coated-ash-valve-seats-rsz.pdf

01/12/2016

Quoting Allis Chalmer Impellers for a Municipal Wastewater Treatment department. We have the best prices for aftermarket parts! Goulds, Fairbanks Morse, Ingersoll, Gorman Rupp, Worthington, lots of other manufacturers too.
http://www.pumpshop.net/pump-parts.html

01/11/2016

Shipping out a Grundfos CR1-6 constant flow & pressure pump today to one of our Power plant customers. These pumps are specially designed to be used in applications including process water, seawater, acids & alkalis, washing & cleaning systems, Boiler feed, and extreme temp variations. Call Pumpcoat to help with your pumping needs.

01/08/2016

The Grand Canyon was started by a river flowing over a flat plain - Even small leaks can cause a lot of damage to a surface. That's why waterproofing is so important! Read on how Pumpcoat can help solve your waterproofing problems...https://pumpcoat.wordpress.com/2016/01/08/too-big-too-little-just-right-pumpcoats-coating-experience-helps-solve-a-customers-waterproofing-problems/

A lamentable issue in the construction industry is that often companies will be too large and streamlined in a trade to be able to take care of all of a customer’s needs, or the company will be too...

12/14/2015

Repairs, repairs, repairs! Putting together a large Goulds pump today at our shop for a Trash burning Power plant customer. We had the shaft repaired & balanced at our affiliate machinist, shipped back to our shop where we will reassemble, supply new seals & gaskets and return the completed pump to customer's site. Big or small, we can fix pumps.

12/01/2015

Mobilizing to do a containment coating at a manufacturing facility. We can help with your corrosion problems! Rebuilding & coating for future corrosion resistance.

11/17/2015

The Mass. Department of Corrections uses our coating systems by Duraflex for their shower rooms and flooring. Super durable, non-skid and easy to clean makes sense for an institution looking for super Industrial flooring.

10/21/2015

Doing a quick turn repair for one of our Power Gen customers - a coating repair on cavitation on their Fire pump. Same day repair so they can put the pump back into service.

10/08/2015

Our field crew is finishing up at an aeronautic manufacturer this week. They have manufacturing machines with coolant pans that get a lot of corrosion and rusting out. We use a specialized epoxy system to rebuild & restore the pans to give the machines a longer life.

09/18/2015

Painting some fuel piping today at one of our customer's facilities with Sherwin Williams Macropoxy. This is a great coating that is specially formulated to protect steel and concrete in Industrial exposures. This product can stand up to salt water immersion too.

09/04/2015

Worked this week at a Power Gen customer in CT completing their new storeroom: non-skid epoxy flooring & exterior waterproofing https://pumpcoat.wordpress.com/2015/09/03/multi-step-storeroom-project-new-non-skid-flooring-wall-waterproofing-and-more/

One of Pumpcoat/PCI Contractor’s Power Generation customers in Connecticut recently built a new storeroom. Their previous one was no longer large enough. Once the new structure was built, there w...

08/25/2015

Heading down to a Nuclear Power plant a couple states down to do an annual warranty check on a couple waste neutralization tanks we coated 2 years ago. We used an Arcor Epoxy system after water blasting & cleaning - EE-95 paste grade for repairing/rebuilding the pitting, then S-20 topcoat For corrosion resistance in aggressive acid applications.
http://www.arcorepoxy.com/Products/Usage-Directory/TankGuard

Protective Epoxy Systems for Tank Applications

08/20/2015

Just completed an epoxy floor and pouring a concrete pad for a power plant in Connecticut! They are building a new store room

07/20/2015

Our field team is hard at work over at a school today south of Boston. We are subcontracting for a company - removing a tile floor and grinding the concrete in preparation for a new floor to be put down.

07/14/2015

Going to look at a waterproofing project today for an underground parking garage in Framingham. Leaks are bad news for the concrete! We can repair, seal & waterproof - call us with any issues and we can help.