Our Services:
We can provide complete technical solutions of different types of Construction and Interior works, Design of Residential, Apartment Building, Commercial Complex, Industrial Building, Academic Building, Road, Steel Structure, Assessment and Audit of Energy, Electrical Safety, Fire Safety and Environmental Management as per International Standard specification, Feasibility study and E
IA or IEE study for different projects. Above works with description are given below-
1. Construction Works
• Land development
• Civil Construction
• Steel structure fabrication and er****on
• Electrical works
• Plumbing and Sanitary Works
2. Supply Works
a. Steel sheet pile supply
b. Rail Slipper supply
c. Lumber and log supply
3. Mechanical Works:
a. Supply and installation of Thermic fluid boilers
b. Supply and installation of seasoning plants
c. Supply and installation of furniture manufacturing machineries
4. Interior decoration works
• Fit out works
• Supply of furniture
• Electrification works
• Supply of floorings
• Supply of doors
• Supply of office furniture
• Supply of kitchen cabinets
• Louvre works
5. Architectural and Engineering design works
A. ARCHITECTURAL DESIGN & DRAWING:
• Landscape
• Master Plan
• Floor Plan Detail
• 3D View of Proposed Building
• Elevation
• Section Detail
• Stair Details
• Column Details
• Wall Details
• Door & Window Detail
• False Slab Position & Detail
• Verandah, Grill, Window (Room & Toilet), Boundary Grill, Main Gate etc detail.
• Top Supervision
B. STRUCTURAL DESIGN & DRAWING:
• Foundation Layout Plan (With Detail measurement)
• Pile/Footing and Column Schedule (with detail measurement)
• Grade Beam Details
• Floor Slab Details
• Lintel, False Slab, Extra Slab Sunshade etc. details
• Column Details
• Stair & Lift Core Details
• UGWR, Soak Well, Soak Pit & Overhead water Tank Details
• All Reinforcement Detail
• All working section Detail
• Top Supervision
C. PLUMBING & SANITARY DESIGN & DRAWING:
• Sanitary Lay-out and Fittings Fixtures
• Toilet Fixture Lay-out Plan
• Sanitary Stacks and Roof Plan
• Working section Details
• Isometric Water Line
• All pipe line diagram details
• Septic Tank, Soak well, Surface Drain etc
• Waste-water and soil pipe details showing position.
• Top Supervision
D. ELECTRICAL DESIGN & DRAWING:
1 Main Power Distribution System
1.1 Sub Station System
1.2 Hv Incoming System
1.3 Lv Incoming System (Outgoing)
1.4 Avr System
1.5 Main Feeder System
1.6 Power Distribution System
2 LV Distribution System
2.1 Lighting Fixture & Fan System
2.2 Lighting & Fan System
2.3 Emergency & Exit Lighting System
2.4 Receptacle System
2.5 Bus Bar Trunking System
2.6 Equipment Grounding System
2.7 Lightning Protection & Earthing System
3 Extra Low Voltage System
3.1 Alarm System
3.2 Fire Alarm & Dtection System
3.3 Interphone System
3.4 Telephone System
3.5 Public Address System
3.6 Lan Piping System
3.7 Cctv
3.8 Pest Control System
3.9 Cable Tv System
4 Special Works
4.1 Generator System
5 Outdoor Works
5.1 Outdoor Lighting System
6 Incoming Feeder Works
6.1 LV Incoming System
6.2 Telephone / PA Incoming System
E. MECHANICAL DESIGN & DRAWING:
• Process layout
• Machine layout
• Thermal system design (Boiler, Compressed Air system, HVAC System)
• Utilities like process water line, cold water line, hot water line design of industries
• Condensate return system
• Firefighting system design
• Effluent Treatment Plant Design
• Water Treatment Plant Design
• Rain water harvesting system design
• Top supervision
F. PLAN APPROVAL SHEET:
• All necessary Drawings for Plan approval & related authority. COST & BUDGET:
• Detail Cost Estimation with Materials analysis.
6. Building integrity assessment
Stage 1: Visual Inspection: Scope of work in this phase includes the following-
Task 1: Review existing building documents and proposed building plan
Step 1: Collect necessary documents from client and review the documents
Step 2: Evaluate soil test report
Step 3: Assess whether the building comply with the building design documents provided by client. Analyze in detail foundation, column and necessary structural components of the building. Task 2: Site visit and visual inspection
Step 1: Visit the site
Step 2: Identification of any structural defect or deterioration of building
Step 3: Report with recommendation
Stage 2: Full investigation:
Full investigation is required if sufficient documentation is not found during stage 1. Full investigation may include the following activities based on the availability of documentation-
1. Tests
• Tensile strength test of rebar
• Rebar scanning
• Concrete Strength test with rebound hammer
• Core test for column and beam concrete strength
• Soil test
2. Preparation of Drawing
• Preparation of as-built layout drawings
• Preparation of as built structural system
• Preparation of as-built foundation system
• Preparation of slab reinforcement details
3. Structural analysis
• Deflection study of the structure
• Study on the adequacy of beam
• Study on the adequacy of column
• Study on the adequacy of footing
• Study on the adequacy of slab
7. Energy audit
• Electricity load profile analysis
• Analysis of Specific energy consumption of the factory
• Identification of saving opportunities in electrical and thermal consumption
• Identification of opportunity for process modification
• Analysis of Carbon footprint and water footprint
8. Electrical and fire safety audit
• Identification of Electrical Hazards (shocks, fire, explosions Etc.)
• Review of protection devices & system of the electrical installation.
• Review of major cables on sampling basis capacity and sizing.
• Survey of factory Lightening Protection System if applicable.
• Survey of Earthing System (Maintenance Aspects).
• Review of Electrical Preventive Maintenance Program through document review.
• Examination of hand tools and Personal Protective Equipment’s (PPE) being used by the factory employee’s.
• Identification of Hot Spot at Electrical Panels by the state of the art instrument Thermal Imager.
• Review of system handling electrical and fire accidents in the factory.
• Review of awareness amongst factory employees towards Electrical and Fire Safety.
• To check the compliance against legal & statutory requirement (Electrical Safety Aspects) as per the applicable standards as below;
o Bangladesh National Building Code- 2006, 2010
o NFPA 70: NEC Edition 2011
• Analysis of observation vis-à-vis regulatory requirements and best practices.
• Identification of gaps and gap analysis.
9. Environmental and Eco Audit
• Eco Audit
• Environmental Management system development
• Policy, procedure development for EMS (Environmental Management System)
• Policy, procedure development for solid waste management system
• Training on Chemical management
10. Feasibility study and Business Development
• Technical, financial and market feasibility study
• To prepare the business plan and required documentation to start a business
• To prepare the ROI, payback period, cash flow diagram, investment plan, breakeven calculation, company formation and structure, operating procedure, control procedure, organogram etc.
• Prepare the BOQ, operating expenses and projected revenue plan
• Production plan and sourcing the different raw material for production
• Policy and procedure development for organizational management
• Recruitment and help to prepare the HR policy including salary structure and other benefits etc.
